BR200.
USER MANUAL FOR YOUR BAUMATIC BR200.3A Larder fridge You will be mine NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference, for you or any person not familiar with the operation of the appliance.
Contents Environmental note 4 Important safety information 5–6 Specifications of your larder fridge Description of the appliance Description of the product features 7 8 9 Using your Baumatic larder fridge Before switching on During first use Turning on the appliance and setting the thermostat 10 10 10 11 Arranging and storing food in your refrigerator 12 Cleaning and maintenance Defrosting the refrigerator compartment Replacing the light bulb 13 13 – 14 14 Installation Electrical connection Posi
Environmental note Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance.
Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Technical Department. IMPORTANT: Any installation work must be carried out by a qualified electrician or competent person. Use of the appliance o Your appliance is only designed to be used in the home.
Child safety o Packaging material should be kept away from children. o Children should not be allowed to touch the controls or play with the appliance. General safety o Do not pull on the power supply cable to remove the plug from your mains supply socket. o Do not pull out or insert the plug with wet hands. o Do not attempt to use your appliance outdoors or any place where it is likely to come into contact with the elements.
Specifications of your larder fridge Congratulations on purchasing a Baumatic larder fridge.
Description of the appliance 1. Refrigerator shelf 2. Crisper cover 3. Crisper 4. Adjustable feet 5. Thermostat control 7. Egg shelf 8. Bottle shelf 9. Middle shelf 10. Butter shelf 11.
Description of the product features 1) Shelves o The shelves may be placed in any of the guide slots within the interior of the appliance. They are protected from sliding out. o To remove a shelf: Take off all of the items that are stored on the shelf that you want to remove. Then lift the front of the shelf and carefully pull it out of the grooves. 2) Defrost water outlet o The interior of the refrigerator is cooled by the cooling plate that is on the rear wall.
Using your Baumatic larder fridge Before switching on o Make sure that it has been installed by a suitably qualified person, as per the information contained in Baumatic’s installation instructions. o After delivery, wait for eight hours before connecting the appliance to your mains supply. This will allow any refrigerant gasses that may have been disturbed during the transportation process, are allowed to settle.
Turning on the appliance and setting the thermostat You switch on your appliance by connecting it to your mains supply and setting the thermostat. The thermostat is located on the upper right hand side of the inside of the cabinet, next to the interior light. o The thermostat automatically regulates the temperature inside the refrigerator, depending on what number you have turned the thermostat control knob to. o Position <0> means that the appliance will not cool. However the light will still function.
Arranging and storing food in your refrigerator o Warm food or evaporating liquids should not be stored in your refrigerator, as this will increase the humidity inside of the appliance. o All foods should be wrapped or covered, this is particularly important if the food has a strong flavour. You should use polythene bags or sheets, aluminium foil, wax paper. Liquids should be stored in covered containers or bottles.
Cleaning and maintenance WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO CLEAN IT. o Do not clean the appliance by pouring water onto it or spraying water over it. o The refrigerator compartment should be cleaned periodically, using a solution of bicarbonate of soda and lukewarm water. o Clean the accessories separately with soap and water. Do not clean them in a dishwasher. o Do not use abrasive products, detergents or soaps.
o The evaporating tray and defrost water drain hole should be cleaned periodically with the defrost drain plug. This will prevent water from collecting in the bottom of the refrigerator, instead of flowing down the defrost drainage channel and drain hole. o You can also pour a small amount of water down the drain hole to clean inside of it.
Installation IMPORTANT: Before installation and usage, read all the instructions and make sure that the voltage (V) and the frequency (Hz) indicated on the rating plate are exactly the same as the voltage and frequency in your home. The rating plate can be found on the front left edge of the inside of the refrigerator.
Positioning o It is advisable that your appliance is only installed in a location where the ambient temperature of the room, corresponds with the climate classification that is stated on the rating plate of your appliance. Your appliance may not function correctly if the ambient temperature falls outside of the following ranges.
Aperture and appliance dimensions 2) Figure 2 shows the aperture size that you will need to be able to install your appliance. o The appliance must be stood on a level floor. You can use the leveling feet to take into account any minor unevenness in the floor. Supplied installation components a) b) c) d) e) f) Top fixing bar Sealing strip Door slider Door guide Fixing screws (Ø4 x 17) Fixing screws (Ø4.2 x 9.
Installing your refrigerator If you need the appliance door to open from the other side, then please reverse the door before commencing the installation process. (See Reversing the door section). 4) Insert the top fixing bar (a) into the slot on the top of the appliance. Use the Ø4.2 x 9.5 fixing screws (f) to fit the fixing bar to the top of the appliance. o Pass the power cable through to the back of the aperture.
6) Align the front feet of the appliance, with the front edge of the kitchen unit. Fix the front feet into position using the Ø4 x 17 fixing screws (e). 7) Screw the top fixing bar to the underneath of the kitchen unit using the Ø4 x 17 fixing screws (e).
8a) Fit the door guides (d) to the appliance door but do not secure them at this stage. o Open the furniture door and the appliance door to their fullest positions. Both of the doors should still be in contact with each other. o Using a pencil, mark where the edge of the appliance door meets with the furniture door. o From the edge of the furniture door, using a pencil you should mark a distance, which is the thickness of the cabinet wall + 10 mm.
Reversing the door of your appliance Caution! After unscrewing any of the fixing hinges, hold the door to prevent it from falling and causing damage. Any parts that you remove from the appliance whilst reversing the door, should be retained for later use. o WHILST SUPPORTING THE DOOR. Unscrew the upper hinge screws. o On the bottom side of the door unscrew the swing stopper screws and remove the stopper (A). Fix the attached stopper with its bearing on the opposite side of the door.
Troubleshooting IMPORTANT: If your refrigerator appears not to be operating properly, before contacting the Baumatic Service Department, please refer to the checklist below. My fridge does not appear to be working/there is no power to my appliance. o Check that the plug is fully inserted into the power socket. o Check that there is power to your mains supply (e.g. that there hasn’t been a power cut or that the fuse hasn’t blown).
Baumatic Ltd. Conditions of Guarantee Dear Customer, Your new Baumatic appliance comes complete with a free 12 month guarantee covering both parts and labour costs resulting from defective materials or workmanship. Baumatic also gives you the opportunity to automatically extend the guarantee period for a further 12 months at no extra cost, giving an initial guarantee period of 24 months. The extended guarantee period applies to England, Scotland, Wales and Northern Ireland only.
Baumatic Ltd You will be mine Headquarters Baumatic Ltd. Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX, United Kingdom Sales Telephone +44 118 933 6900 Sales Fax +44 118 931 0035 Service Telephone +44 118 933 6911 Service Fax +44 118 986 9124 Spares Telephone +44 118 933 6922 Technical / Advice Telephone +44 118 933 6933 E-mail: sales@baumatic.co.uk technical@baumatic.co.uk Http (Internet site): www.baumatic.
