User manual

Installing your refrigerator
If you need the appliance door to open from the
other side, then please reverse the door before
commencing the installation process. (See Reversing
the door section).
4) Insert the top fixing bar
(a) into the slot on the top
of the appliance. Use the
Ø4.2 x 9.5 fixing screws (f)
to fit the fixing bar to the
top of the appliance.
o Pass the power
cable through to
the back of the
aperture. This will
allow the
appliance to be
easily plugged in,
once you have
completed the rest
of the installation.
18
t the sealing strip so that is the
me height as the height of the
aperture.
Stick the sealing strip onto
the side of the aperture that
the appliance door will open
from.
Carefully lift the appliance
and place it into the aperture
of the kitchen unit that you
are installing it into.
Slide the appliance over to
the far left of the aperture,
versed the
door. In which case you
should slide the appliance
over to the far right of the aperture.
5) Cu
sa
o
o
o
unless you have re