User manual

Shelf positions
Your oven will come supplied with
the following oven furniture:
(A) Oven shelf
(B) Enamelled baking tray
o The numbers 1 – 4, indicate the
different shelf positions that you
can utilise within the oven.
(Image for reference only – actual product may differ slightly)
o Insert the oven shelf and baking tray between the 2 side rails at
any position (1 to 4) on both sides. The oven shelf has safety stops
to prevent accidental withdraw. After engaging the oven shelf into
the side rails, as you push the oven shelf into the oven, lift the front
of the shelf slightly to bypass the stops and allow the oven shelf to
slide fully into the rails.
o To remove the oven shelf, gently pull the oven shelf outwards.
When the shelf stops, lift the front slightly to bypass the safety
stops and then completely withdraw the oven shelf from the oven.
o When installed correctly, the shelf and tray should be horizontal and
not on an angle.
Cleaning and maintenance
Cleaning operations must only be carried out when the
oven is cool.
The appliance should be disconnected from your mains
supply before commencing any cleaning process.
o The oven should be thoroughly cleaned before it is operated for the
first time and after each use. This will avoid residual food stuffs
becoming baked on the oven cavity. After residues have been
baked on several times, they are far more difficult to remove.
o Never clean the oven surfaces by steam cleaning.
o The oven cavity should only be cleaned with warm soapy water,
using either a sponge or soft cloth. No abrasive cleaners should be
used.
21