Operation Manual

7
To use your cooker hood:
1) Make sure it has been properly installed.
2) Find the CONTROL PANEL. It is located on the hood’s front
surface near the bottom of the unit.
3) The CONTROL PANEL contains two rows of switches. These perform
separate functions. You will need to understand what both switches do
before you attempt to use your cooker hood.
* Note: The hood should be switched on at least as soon as you start
cooking. It is a good idea to have had it running for 5 minutes prior
to cooking and at least 15 minutes after you have finished cooking.
One row of sliding switches is
for the cooker hood’s
operation
MOTOR ON /OFF switch – the ‘ ’ switch (figure above) turns the motor
on and off and adjusts its speed. There are three speeds, pushing the switch to
the right increases the speeds. The leftmost setting is ‘OFF’.This hood has a microswitch
that lets the operator turn the appliance on and off by simply opening and closing the
front door, this will only work if the switches are left in the on position.
The other is to control the light.
LIGHT ON/OFF switch - Pressing the ‘ ’ switch (LOWER figure above) turns
your cooker hood’s light on (push left) and off (push right).
PLEASE NOTE THAT YOUR BAUMATIC COOKER HOOD CAN BE
USED EITHER IN RECIRCULATION MODE OR IN EXTRACTION
MODE. TO USE IN RE-CIRCULATION MODE, YOU WILL NEED TO
FIT THE CARBON FILTER(s).
Using your Baumatic Cooker Hood: