User manual

13
itting the carbon filter
the appliance is being used to be used in recirculation mode then it
necessary to fit carbon filters. This will help to absorb unpleasant
dours caused by cooking.
IMPORTANT: BEFORE ATTEMPTING TO FIT OR
REMOVE THE CARBON FILTERS, YOU MUST
COOKER HOOD FROM YOUR MAINS SUPPLY.
1) Remove the grease filters.
2) Turn the switch on the motor to recirculation mode
shown in diagram 3.
3) Hook the carbon filter
over the pins that are on
either side of the motor.
4) Turn the carbon filter
anticlockwise, until you
g
o The carbon if
they show signs of damage.
F
If
is
o
ENSURE THAT YOU HAVE DISCONNECTED THE
before fitting the carbon filter. The position of the switch is
feel it click into place.
rease filters.
filters should be replaced every three months or
o Refit the