User manual

Installation
IMPORTA usage, read
all the instructions and make sure that the
voltage (V) and the frequency (Hz) indicated on
the rating plate are exactly the same as the
voltage and frequency in your home. The rating
plate can be found behind the grease filters.
eclines all responsibility in the event of the installer
prevention regulations in force,
which are necessary for normal use and the regular operation of the
R
PERMANENT INSTALLATION.
o The power cable must be connected to the terminals marked L
(live) and N (neutral) in the hood and fixed with a cable clamp.
o The cooker hood’s power cable must be fitted upstream from the
ing an omni-polar switch with a contact
distance of at least 3 mm.
S APPLIANCE MUST NOT BE
ARTHED. It should only be connected by a competent
person, using fix
NT: Before installation and
The manufacturer d
failing to observe all the accident
electric system.
Electrical connection
YOUR COOKER HOOD IS INTENDED FO FITTED AND
electrical connection, us
WARNING: THI
E
ed wiring via a double pole switched fused
spur outlet. (UK
We recommend
electrician, who
with the I.E.E. and local regulations. The wires in the mains lead are
ordance with the following UK code:
Blue = Neutral
Brown = Live
ONLY).
that the appliance is connected by a qualified
is a member of the N.I.C.E.I.C. and who will comply
coloured in acc
14