User manual

15
You will only find two wires in the main’s lead (blue and
brown), neither must be connected to the earth terminal.
o As the colours
correspond wit ls
in your spur bo
ue wire must be connected to the
terminal marked “N” (neutral), or coloured
black.
cted to the
al marked “L” (live), or coloured red.
Be r
o
addition check whether there is an
electrical socket available that will be accessible once the hood is
mounted. If the product is going to be used in extraction mode,
a ducting hose to the
prior to the fitting of the
cooker hood.
ly
o Before commencing installation of the cooker hood the grease
filter should be remov
o Check inside the product and insure that there is no transit
s,
re
use.
o
o the rear wall and
ceiling. If this is not possible, then a thick, protective covering
ed o
help to protect the e
o Select a flat surface for assembling the cooker hood. Cover that
surface with a pro
parts and fittings o
of the wires in the appliance’s mains lead may not
h the coloured markings identifying the termina
x, please proceed as follows:
o The bl
o The brown wire must be conne
termin
fo e beginning installation
Check that the product purchased is of a suitable size for the
chosen installation area. In
then there should also be space to connect
outside.
o Carry out all necessary masonry work
o Ensure that all electrical connections are carried out by a suitab
qualified person.
ed.
packaging or any other materials, such as packets of screw
guarantees etc. These should be removed and kept for futu
If possible, disconnect and move freestanding or slot-in cookers
from their position, to provide easier access t
ver the worktop, hob top or cooker. This will
s surfaces from damage and debris.
should be plac
tective covering and place all cooker hood
n it.