User manual

16
o In addition check whether there is an electrical socket available,
r the hood is mounted. If you are
going to use the appliance in extractor mode, you should also
o
of the materials, in accordance with the type of wall
and ceiling. The wall and ceiling must be strong enough to take
o Do not tile, grout or silicone this appliance to the wall. This
In
IMPORTANT: YOU WILL HAVE TO DECIDE BEFORE
USE
UNDERSTAND THE DIFFERENCES BETWEEN THESE
TWO MODES.
o
o nce should only be used during operation
of the cooker hood. They should not be left on permanently and
IMPO
which will be accessible afte
ensure that there is space to connect a fumes discharge device
to the outside.
Raw plugs are provided to secure the hood to most types of
walls and ceilings. However a qualified technician must verify the
suitability
the weight of the hood.
appliance is designed to be surface mounted only.
stalling your cooker hood
INSTALLING YOUR COOKER HOOD WHETHER TO
IT IN EXTRACTION MODE OR RECIRCULATION
MODE. PLEASE TURN TO PAGE 21 NOW TO
The cooker hood should not be exposed to a direct heat source
from the cooking device underneath it, i.e. naked flame from a
gas burner or heat from electric hob zones without a pan on
them.
o We recommend that at least two people install this hood.
The lights on this applia
used as a lighting source.
RTANT: YOUR COOKER HOOD SHOULD BE CONNECTED TO
YOUR Y AFTER MAINS SUPPL THE REST OF THE INSTALLATION
PROCESS HAS BEEN COMPLETED.
1) Remove the metal grease filters.