User manual

Installing your cooker hood (part 2)
18
1) Pla
suppo
The hood can either be secured to the underneath of a cupboard
a) Using a drill bit with a 6 mm diameter, make holes in the
upboard/in the wall on the positions that you have marked in step 1.
2b) Insert rawplugs into all of the holes that you have drilled.
2c) Fasten the upper support screws halfway in.
2d) Leave the upper support screws 10 mm out of the wall.
ce the hood against the wall and mark the positions for the
rting bracket bolt holes.
o
or secured to the wall behind the hood.
o You should mark the holes that are relevant to the installation
that you are going to complete.
2
c