User manual

20
If you wish to connect your ducting hose to the back of the hood,
o Push out the blanking plate in the back of the appliance and
g hose to
the product.
Th uirement
no
appliance should be connected to the electrical supply. See page 14 –
5 for detailed information on the electrical connection.
o Connect a 125 mm ducting hose to the ducting hose collar
(please note that the ducting hose is not supplied with the
appliance).
o The other end of the ducting hose should be connected to your
discharge outlet that is suitable for cooking vapours. It should
have a cross section of at least 150 cm².
o The maximum distance between the coupling and your discharge
outlet should be 3 metres, with one 90 degree bend.
then you will need to do the following:
place it in the hole on the top of the appliance. You should then
follow the steps outlined above to connect the ductin
IMPORTANT: Once you have completed the fitting of the
ducting hose, you must secure all four of the support screws to
secure the cooker hood to the wall/to the cupboard.
Electrical connection
e electrical connection must correspond to the electrical req
ted on the rating plate, which is placed inside the cooker hood. The
1