Operation Manual

12
HOW TO SET THE OVEN CONTROLS
BEEPS DURING OVEN SETTINGS
• ONE BEEP: Oven accepts the entry.
• TWO BEEPS: Oven does not accept the entry. Please check and try again.
SETTING THE CLOCK
1. Press and hold CLOCK/WEI.ADJ. button for 3 seconds, “H24” displays. Press this
button again, the oven turn to 12-hour system.
2. Rotate the TIME/MENU dial until the correct hour is displayed.
3. Press CLOCK/WEI.ADJ. button.
4. Rotate the TIME/MENU dial until the correct minute is displayed.
5. Press CLOCK/WEI.ADJ. button to confirm.
MICROWAVE
Microwave cooking allows you to customize cooking power and time. First, you select a power
level by pressing the POWER button a number of times (see the table below). Then you set
the cooking time by rotating the TIME/MENU dial, before pushing START.
Press POWER button to select cooking power
Press Power Description
Once 100% (P-HI) High
Twice 90% (P-90)
3 times 80% (P-80)
4 times 70% (P-70) Medium
High
5 times 60% (P-60)
6 times 50% (P-50) Medium
7 times 40% (P-40)
8 times 30% (P-30) Med
Low/Defrost
9 times 20% (P-20)
10 times 10% (P-10) Low
11 times 0% (P-00)
Suppose you want to cook for 5 minute at 60% power level:
1. Press POWER button 5 times.
2. Rotate the TIME/MENU dial until the correct cooking time is displayed.
3. Press START.
NOTE:
1. If you want to temporarily stop a cooking session, press STOP/CANCEL once and
then you can start the cooking again by pressing START; or press STOP/CANCEL twice to
cancel the cooking program altogether.
2. After the cooking time ends, the system will beep four times and END is displayed.
Before starting another cooking session, you need to clear the display and reset the system
by pressing the STOP/CANCEL button.