User manual

13
Before first use
o To remove any residue from the oven that may have been left
from the manufacturing process, you should place a cup that is
half filled with water in the microwave.
o Set the microwave on its highest power level for 2 minutes.
o The oven cavity and outside of the appliance should be cleaned
with warm soapy water, using either a sponge or soft cloth. No
abrasive cleaners should be used. The appliance should be
thoroughly dried afterwards.
o We would recommend that an appropriate stainless steel cleaner
and polish is regularly used on the stainless steel surfaces of this
appliance.
Microwave cooking
o Once the clock has been set, your microwave is then ready to
use.
o Check that the rotating plate and rotating base are correctly
assembled in the cavity. NEVER use the grill rack during
microwave cooking.
o Place whatever you are cooking in the centre of the microwave
cavity and then close the microwave door. IMPORTANT: You
should make sure that the door of the microwave is shut
securely.
o After initially supplying power to the appliance, the
colon on the LCD display will flash, Press the stop /
clear button (3) to enter manual mode.
o Press the micro power button (6) repeatedly to select
the required cooking power from the following options:
100P Æ 80P Æ 60P Æ 40P Æ 20P. Please see the table below
for a power level guide.
o Use the plus (2) and minus (5) buttons to set the
desired cooking time. The maximum time available is
60 minutes.
o Press the instant / start button (4) to begin the cooking
function. The LCD display will count down the remaining time.
o It is possible to change the cooking time during operation, using
the plus and minus buttons.