User's Manual

30
lectrical connection
plate
corresponds with your mains supply voltage.
E.I.C. and who will
comply with the I.E.E. and local regulations.
o WARNING: THIS APPLIANCE MUST BE EARTHED.
moulded plug, which must be
connected to an earthed socket.
g, then a 13
amp ASTA approved (BS 1362) fuse must be used.
accessible even when your microwave is
located on the worktop.
o he wiring in the mains lead is coloured as follows:
l
Green and yellow Earth
ifying the terminals
in your spur box, please proceed as follows:
e connected to the terminal marked “L”
ive), or coloured red.
ected to the terminal marked “N”
eutral), or coloured black.
arth), or by the earth symbol, or coloured green
nd yellow.
sent. The cord clamp must be secured over the
outer sheath.
E
o Before connecting the appliance, make sure that the
supply voltage marked on the rating
o We recommend that the appliance is connected by a qualified
electrician, who is a member of the N.I.C.
o This appliance is supplied with a
o If in future you need to change the fuse in this plu
o The socket must still be
T
Brown Live
Blue Neutra
o As the colours of the wires in the appliance’s mains lead may not
correspond with the coloured markings ident
The brown wire must b
(l
The blue wire must be conn
(n
The green and yellow wire must be connected to the terminal
marked “E” (e
a
o When the connection is completed, no stray strands or cut wire
should be pre