User manual

Installing your freezer
If you need the appliance door to open from the
other side, then please reverse the door before
commencing the installation process. (See Reversing
the door section).
4) Insert the top fixing bar
(a) into the slot on the top
of the appliance. Use the
Ø4.2 x 9.5 fixing screws (f)
to fit the fixing bar to the
top of the appliance.
o Pass the power
cable through to
the back of the
aperture. This will
allow the
appliance to be
easily plugged in,
once you have
completed the rest
of the installation.
5) Cut the sealing strip so that is the
same height as the height of the
aperture.
o Stick the sealing strip onto the
side of the aperture that the
appliance door will open from.
o Carefully lift the appliance and
place it into the aperture of the
kitchen unit that you are
installing it into.
o Slide the appliance over to the
far left of the aperture, unless
you have reversed the door. In
which case you should slide the
appliance over to the far right of the aperture.
20