BW150SS 15 cm 6 Bottle built - in electronic wine cooler
USER MANUAL FOR YOUR BAUMATIC BW150SS 15 cm 6 Bottle built-in electronic wine cooler NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference, for you or any person not familiar with the operation of the appliance.
Contents Environmental note 4 Important safety information 5–6 Specifications of your wine cooler 7–8 Description of the appliance Control panel Description of the product features 8-9 8 9 Using your Baumatic wine cooler Before switching on During first use Switching on the appliance and setting the temperature Loading the wine cooler 10-12 10 10 11 12 Storing your wines Wine storage problems 12-13 14 Cleaning and maintenance Defrosting 15-16 16 Installation Electrical connection Positioning B
Environmental note Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance. o The packaging materials that Baumatic uses are environmentally friendly and can be recycled.
Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Advice Line. IMPORTANT: Any installation work must be carried out by a qualified electrician or competent person. Use of the appliance o Your appliance is only designed to be used in the home.
Child safety o Packaging material should be kept away from children. o Children should not be allowed to touch the controls or play with the appliance. General safety o Do not pull on the power supply cable to remove the plug from your mains supply socket. o Do not pull out or insert the plug with wet hands. o Do not attempt to use your appliance outdoors or any place where it is likely to come into contact with the elements.
Specifications of your wine cooler Congratulations on purchasing a Baumatic wine cooler Dimensions of appliance Dimensions of aperture* Height: Width: Depth: Height: Width: Depth: o o o o o o o o 820 - 890 mm 150 mm 550 mm 820 - 890 mm 160 mm (min) 553 mm (min) Gross capacity: 32 litres Bottle capacity: 6 x 0.
o Smoked glass door o Stainless steel door frame o 1 temperature zone: 4 – 18 °C * Please refer to the installation instructions for more specific information on the size of aperture that you will require. IMPORTANT: When you install your appliance it is important to bear in mind its climatic rating. In order to find out the climatic rating of your appliance, you should check the rating plate. The rating plate is located on the rear or inside of the appliance.
Description of the product features 1) Control panel o The control panel is located in the middle of the appliance, behind the glass door. This means it is easy to set the temperature of the appliance and see what temperature the appliance is set to. 2) One cooling zone o There is one cooling zone inside of your wine cooler. o The cooling zone has a temperature control and temperature display. 3) Interior light o The cooling zone has an interior light.
Using your Baumatic wine cooler Before switching on o Make sure that it has been installed by a suitably qualified person, as per the information contained in Baumatic’s installation instructions. o After delivery, wait for eight hours before connecting the appliance to your mains supply. This will allow any refrigerant gasses that may have been disturbed during the transportation process to settle.
Switching on the appliance and setting the temperature o After following the installation instructions contained in this booklet, connect the appliance to your mains supply. o The appliance will be preset to a temperature of 13 °C. o To adjust the operating temperature, press the temperature setting button (2). Use the temperature increase and decrease button (6) to set the temperature that you require. Each press of these buttons will adjust the temperature on the temperature display (5) by one degree.
Loading the wine cooler o IMPORTANT: Your appliance is ideally suited to store 0.75 litre wine bottles. o Always check that you can close the door without it fouling on a wine bottle, before shutting it. o When loading several bottles of wine at once, it will take longer for the appliance to cool the individual bottles.
o If wine is kept at too low a temperature, this can result in the development of harmful deposits. A humidity of 70% is ideal for keeping corks from shrinking. o After a bottle of wine has been opened, the wine comes into contact with air. So it is best to store the remainder of the bottle upright, to minimize the surface area of the wine that is coming into contact with the air.
Wine storage problems Corking- a tiny percentage of bottled wine (about 1%) will suffer from this. The cork reacts with the wine and gives it a musty, unpleasant taste. It is the most common wine storage problem and is caused by harmless bacteria growing on the cork. As unfortunate as this is, there is nothing to do but to discard all of the wine in the affected bottle. This is not to be confused with small fragments of cork floating in the wine itself, which will not impair the flavour.
Cleaning and maintenance WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO CLEAN IT. o Do not clean the appliance by pouring water onto it or spraying water over it. o The interior of the wine cooler should be cleaned periodically, using a solution of bicarbonate of soda and lukewarm water. o Clean the accessories separately with soap and water. Do not clean them in a dishwasher. o Do not use abrasive products, detergents or soaps.
Defrosting o Defrosting occurs automatically inside of the wine cooler during operation. The defrost water is collected by the evaporating tray and evaporates automatically. o The evaporating tray and defrost water drain hole should be cleaned periodically. This will prevent water from collecting in the bottom of the wine cooler, instead of flowing down the defrost drainage channel and drain hole. o You can also pour a small amount of water down the drain hole to clean inside of it.
o The wiring in the mains lead is coloured as follows: Brown Blue Green and yellow Live Neutral Earth o As the colours of the wires in the appliance’s mains lead may not correspond with the coloured markings identifying the terminals in your spur box, please proceed as follows: The brown wire must be connected to the terminal marked “L” (live), or coloured red. The blue wire must be connected to the terminal marked “N” (neutral), or coloured black.
o Place the appliance flatly and firmly on a solid base. The appliance is fitted with adjustable feet, which should be used to level the appliance. o Be sure to leave enough space for the opening of the door, to avoid damage to the appliance or personal injury. o IMPORTANT: The vent at the base of the appliance is for ventilation. Nothing should be placed in front of this vent; otherwise your wine cooler may not operate properly.
o IMPORTANT: The vent at the base of the appliance is for ventilation. Nothing should be placed in front of this vent; otherwise your wine cooler may not operate properly. o IMPORTANT: When building the appliance into a housing unit, YOU MUST ensure there is a 100 x 100 mm vent at the front bottom of the unit and at the bottom rear of the housing unit. Reversing the door of your wine cooler This appliance has the capability of the door opening from either the left or right hand side.
1 2 3 4 5 6 = = = = = = Hinge screws Upper left hand hinge Upper right hand hinge Upper door pin Lower hinge and pin Lower left hand hinge screws 7 = Lower right hand hinge screws 8 = Wine cooler door 1) Remove the hinge screws (1), upper left hand hinge (2) and upper right hand hinge (3) from the appliance, using a Phillips head screw driver (S1). 2) Remove the wine cooler door (8) from the appliance and place it onto a cushioned surface so that damage does not occur to it.
6) Fix the upper right hand hinge (3) to the opposite side of the cabinet using the hinge screws (1), ensuring that the screws are fully tightened. 7) Rotate the wine cooler door (8) through 180° and then place it onto the lower hinge and pin (5). IMPORTANT: Ensure that the pin is fully inserted into the hole in the bottom of the wine cooler door. 8) Insert the upper right hand hinge (3) into the top of the wine cooler door (8).
Troubleshooting IMPORTANT: If your wine cooler appears not to be operating properly, before contacting the Customer Care Department, please refer to the checklist below. PROBLEM Appliance does not operate Temperature inside the appliance is too warm. Temperature inside the appliance is too cold Vibration Moisture is forming on the inside of the appliance. Moisture is forming on the outside of the appliance. POSSIBLE CAUSE Not plugged in. The circuit breaker has tripped or the fuse has blown.
Error codes If your appliance senses that it is not operating correctly, then an error code may appear on the LED display. The following error codes can possibly be remedied by the customer and the steps outlined below should be followed. LED displays “H” o This indicates that the temperature being achieved by the appliance is far higher than the temperature that you have set. o Check that the door has not been left open in error.
IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact the Customer Care Department on telephone number (0118) 933 6911. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. Please note that if an engineer is asked to attend whilst the product is under guarantee and finds that the problem is not the result of an appliance fault, then you may be liable for the cost of the call out charge.
United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Czech Republic Baumatic CR spol s.r.o. Průmyslová zóna Sever 696 460 11 Liberec 11 Czech Republic Sales Telephone (0118) 933 6900 Sales Fax (0118) 931 0035 Customer Care Telephone (0118) 933 6911 Customer Care Fax (0118) 986 9124 Spares Telephone (01235) 437244 Advice Line Telephone (0118) 933 6933 www.baumatic.cz E-mail: sales@baumatic.co.uk customercare@baumatic.co.uk spares@baumatic.co.
www.baumatic.
