User manual

o IMPORTANT: The vent at the base of the appliance is for

ventilation. Nothing should be placed in front of this vent;

otherwise your wine cooler may not operate properly.

o IMPORTANT: When building the appliance into a housing

unit, YOU MUST ensure there is a 100 x 100 mm vent at

the front bottom of the unit and at the bottom rear of the

housing unit.

Reversing the door of your wine cooler

This appliance has the capability of the door opening from either the

left or right hand side.

The unit is delivered to you with the door opening from the left side. If

you want to reverse the opening direction of the door, please follow

the instructions below:

Any parts that you remove from the appliance whilst

reversing the door, should be retained for later use.

Tools required

S1 = Phillips head screwdriver

S2 = Flat head screwdriver