BW300SS 30 cm 12 Bottle built- in electronic wine cooler
USER MANUAL FOR YOUR BAUMATIC BW300SS 30 cm 12 Bottle built-in electronic wine cooler NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference, for you or any person not familiar with the operation of the appliance.
Contents Environmental note 4 Important safety information 5–6 Specifications of your wine cooler 7–8 Description of the appliance Control panel Description of the product features 8-10 8 9-10 Using your Baumatic wine cooler Before switching on During first use Switching on the appliance and setting the temperature Loading the wine cooler 10-12 10 10 11 12 Storing your wines Wine storage problems 12-14 14-15 Cleaning and maintenance Defrosting 15-16 16 Installation Electrical connection Positi
Environmental note Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance. o The packaging materials that Baumatic uses are environmentally friendly and can be recycled.
Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Advice Line. IMPORTANT: Any installation work must be carried out by a qualified electrician or competent person. Use of the appliance o Your appliance is only designed to be used in the home.
Child safety o Packaging material should be kept away from children. o Children should not be allowed to touch the controls or play with the appliance. General safety o Do not pull on the power supply cable to remove the plug from your mains supply socket. o Do not pull out or insert the plug with wet hands. o Do not attempt to use your appliance outdoors or any place where it is likely to come into contact with the elements.
Specifications of your wine cooler Congratulations on purchasing a Baumatic wine cooler Dimensions of appliance Dimensions of aperture* Height: Width: Depth: Height: Width: Depth: o o o o o o o o o o o o 820 - 890 mm 295 mm 550 mm 820 - 890 mm 300 mm (min) 553 mm (min) Gross capacity: 55 litres Net capacity: 52 litres Bottle capacity: 12 x 0.
IMPORTANT: When you install your appliance it is important to bear in mind its climatic rating. In order to find out the climatic rating of your appliance, you should check the rating plate. The rating plate is located on the rear or inside of the appliance. The rating plate will indicate the ambient temperature range that your appliance will function correctly within. It is also advisable to make a note of the model number and the serial number of the appliance before installing it.
Description of the product features 1) Control panel o The control panel is located at the top of the appliance, behind the glass door. This means it is easy to set the temperature of the appliance and see what temperature the appliance is set to. 2) One cooling zone o There is one cooling zone inside of your wine cooler. o The cooling zone has a temperature control and temperature display. 3) Interior light o The cooling zone has an interior light.
7) Error codes o If the appliance senses a problem, then an audible alarm will sound and an alarm code will show on the LCD display (5). See the error codes section of this manual for more detailed information. Using your Baumatic wine cooler Before switching on o Make sure that it has been installed by a suitably qualified person, as per the information contained in Baumatic’s installation instructions. o After delivery, wait for eight hours before connecting the appliance to your mains supply.
Switching on the appliance and setting the temperature o After following the installation instructions contained in this booklet, connect the appliance to your mains supply. o The appliance will be preset to a temperature of 13 °C. o To adjust the operating temperature, press the temperature setting button (2). Use the temperature increase (7) and temperature decrease (8) buttons to set the temperature that you require.
Loading the wine cooler o IMPORTANT: Your appliance is ideally suited to store 0.75 litre wine bottles. o To fit 3 wine bottles on a shelf, you should load it in the way shown in the above drawing. o Always check that you can close the door without it fouling on a wine bottle, before shutting it. o When loading several bottles of wine at once, it will take longer for the appliance to cool the individual bottles.
** Chardonnay is often served too cold. You should chill it at a warmer temperature inside of your wine cooler. Or leave it to warm slightly when you remove it from your wine cooler. o Temperature stability is the most important factor when it comes to storing wine. o Exposure to light, vibrations or fluctuations in temperature and humidity can all cause wine to spoil. When properly stored, wines not only maintain their quality but many will actually improve in aroma, flavour and complexity as they mature.
o To make the most of the bouquet and taste of your wine, never fill more than half a glass at a time. It will also help if the shape of your wine glass is appropriate for your wine. The size and shape of your wine glass’s bowl will determine the intensity and complexity of the bouquet. The stem should be long enough to allow you to avoid hand contact with the bowl of the glass and should be tulip-shaped or tapered at the top.
A good way to get around sediment (if it is a problem) is to stand the bottle upright, the day before opening, so that the sediment can settle to the bottom of the bottle. You can also decant your wine; decanting will “open up” the flavour of both young and old wines, but younger wines in particular. To decant, pour the wine slowly and evenly into your decanter. Cleaning and maintenance WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO CLEAN IT.
Defrosting o Defrosting occurs automatically inside of the wine cooler during operation. The defrost water is collected by the evaporating tray and evaporates automatically. o The evaporating tray and defrost water drain hole should be cleaned periodically. This will prevent water from collecting in the bottom of the wine cooler, instead of flowing down the defrost drainage channel and drain hole. o You can also pour a small amount of water down the drain hole to clean inside of it.
o The wiring in the mains lead is coloured as follows: Brown Blue Green and yellow Live Neutral Earth o As the colours of the wires in the appliance’s mains lead may not correspond with the coloured markings identifying the terminals in your spur box, please proceed as follows: The brown wire must be connected to the terminal marked “L” (live), or coloured red. The blue wire must be connected to the terminal marked “N” (neutral), or coloured black.
o Place the appliance flatly and firmly on a solid base. The appliance is fitted with adjustable feet, which should be used to level the appliance. o Be sure to leave enough space for the opening of the door, to avoid damage to the appliance or personal injury. o IMPORTANT: The vent at the base of the appliance is for ventilation. Nothing should be placed in front of this vent; otherwise your wine cooler may not operate properly.
Reversing the door of your wine cooler This appliance has the capability of the door opening from either the left or right hand side. The unit is delivered to you with the door opening from the left side. If you want to reverse the opening direction of the door, please follow the instructions below: Any parts that you remove from the appliance whilst reversing the door, should be retained for later use.
1) Remove the hinge screws (1), upper left hand hinge (2) and upper right hand hinge (3) from the appliance, using a Phillips head screw driver (S1). 2) Remove the wine cooler door (8) from the appliance and place it onto a cushioned surface so that damage does not occur to it. 3) Remove the upper door pin (4) from the top of the door, using a flat head screwdriver (S2). 4) Remove the lower left hand hinge screws (6) and then the lower hinge and pin (5) from the right hand side of the cabinet.
9) Place the upper door pin (4) into the hole on the left hand side of the wine cooler door (8). Tighten the upper door pin fully, using a flat head screwdriver (S2). 10) Fix the upper left hand hinge (2) to the opposite side of the cabinet using the hinge screws (1), ensuring that the screws are fully tightened. IMPORTANT: Check that the door opens and shuts correctly, without fouling, after you have completed the door reversal process.
Troubleshooting IMPORTANT: If your wine cooler appears not to be operating properly, before contacting the Customer Care Department, please refer to the checklist below. PROBLEM Appliance does not operate Temperature inside the appliance is too warm. Temperature inside the appliance is too cold Vibration Moisture is forming on the inside of the appliance. Moisture is forming on the outside of the appliance. POSSIBLE CAUSE Not plugged in. The circuit breaker has tripped or the fuse has blown.
Error codes If your appliance senses that it is not operating correctly, then an error code may appear on the LCD display. The following error codes can possibly be remedied by the customer and the steps outlined below should be followed. LCD displays “HIGH TEMP” o This indicates that the temperature being achieved by the appliance is far higher than the temperature that you have set. o Check that the door has not been left open in error.
IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact the Customer Care Department on telephone number (0118) 933 6911. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. Please note that if an engineer is asked to attend whilst the product is under guarantee and finds that the problem is not the result of an appliance fault, then you may be liable for the cost of the call out charge.
United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Czech Republic Baumatic CR spol s.r.o. Průmyslová zóna Sever 696 460 11 Liberec 11 Czech Republic Sales Telephone (0118) 933 6900 Sales Fax (0118) 931 0035 Customer Care Telephone (0118) 933 6911 Customer Care Fax (0118) 986 9124 Spares Telephone (01235) 437244 Advice Line Telephone (0118) 933 6933 www.baumatic.cz E-mail: sales@baumatic.co.uk customercare@baumatic.co.uk spares@baumatic.co.
