User manual

11
Switching on the appliance and setting the temperature
o After following the installation instructions contained in this
booklet, connect the appliance to your mains supply.
o The appliance will be preset to a temperature of 13 °C.
o To adjust the operating temperature, press the temperature
setting button (2). Use the temperature increase (7) and
temperature decrease (8) buttons to set the temperature that
you require. Each press of these buttons will adjust the
temperature on the temperature display (6) by one degree.
o When the temperature that you require appears on the
temperature display, you should stop pressing the temperature
increase and decrease buttons. Press the temperature setting
button again to confirm the operating temperature.
o Cool air falls and warmer air rises, so there will be a slight
temperature variation between the top of the cabinet and the
bottom of the cabinet.
o The temperature sensor is located in the middle of the appliance
and will record the temperature being maintained in this part of
the appliance. The temperature at the top of the wine cooler will
be slightly warmer and the temperature at the bottom of the
wine cooler will be slightly colder.
o If there is a power cut, when the power is restored, the
appliance will remember the most recent temperature setting
automatically.