User manual

18
o Remove the upper hinge cover (1).
o Use a screwdriver to remove the two screws (2) holding the
upper hinge (3) to the right hand side of the housing.
o Carefully lift up the door and place it on a soft surface to protect
it from scratches.
o Use a suitable pointed tool to remove the covers for the screw
holes (12).
o Pull out the two bolts (6) which hold the lower right hinge plate
(10) in position.
o Remove the bolt and the adjustable foot (5) on the left and fit
them into the corresponding thread on the right.
o Remove the hinge pin (11) and the adjustable foot (7) from the
hinge plate (10) and replace them on the other side of the hinge
plate (10).
o Install the lower hinge plate (10) on the left.
o Replace the door (turned through 180°) in its new position.
Ensure that the hinge pin (11) is inserted into the guide hole on
the lower part of the door.
o Install the upper hinge (3) on the left hand side, using the
screws (2). Ensure that the hinge pin is inserted into the guide
hole on the upper part of the door.
o Replace the screw hole covers (12) in the corresponding holes
on the right.
o Replace the hinge cover (1) on the upper hinge.