Instruction manual
Models covered by this manual: B721BL-A B721W-A B722SS-A B723SS-A B724SS-A USER AND INSTALLATION INSTRUCTIONS
For future reference please record the following information which can be found on the Rating Plate and the date of purchase which can be found in the invoice: Model Number ……………………. Serial Number ……………………. Date of Purchase ……………………. Supplier …………………….
CONTENTS General Information Pages 3-4 Warning and Safety Instructions Pages 5-6 Installation Instructions Pages 7-11 Timer Instructions Pages 12-14 Before the first use Page 15 Operating Instructions Pages 16-20 Cooking Guide Page 21 Cleaning and Maintenance Page 22 Fault Finding Page 23 Technical Data Page 24 Conditions of Guarantee Page 25
GENERAL INFORMATION Please read this booklet thoroughly before you use this appliance. It is important that you understand all the control functions before commencing to cook with your Baumatic appliance. Please remember the advice and warnings shown on page 5 which is headed ‘IMPORTANT – Warning and Safety Instructions’. This appliance is designed for domestic household use and can be built into a standard kitchen cabinet or housing unit.
The Warranty applies to Great Britain and Northern Ireland only. In the event that you require any After Sales Service or advice, please contact the Baumatic Service Department on telephone number – 0118 933 6911. Before using this appliance ensure that any protective packaging or coatings have been removed. To aid the protection of the environment, please sort the packing materials into different types and dispose of them in accordance with the local waste disposal laws.
IMPORTANT NOTE – WARNING AND SAFETY INSTRUCTIONS Warning: this appliance must be earthed. This appliance complies with all current European safety legislation, however Baumatic do wish to emphasise that compliance does not remove the fact that the appliance surfaces will become hot during use and retain heat after operation.
NOTE: This appliance must be correctly installed by a suitably qualified person, strictly in accordance with the manufacturer’s instructions. For electrical installations, NICEIC registration is recommended. Baumatic Ltd declines any responsibility for injury or damage to persons or property as a result of improper use or installation of this appliance. Please note that this appliance carries the CE mark for normal domestic use and is not suitable for the marine environment.
INSTALLATION INSTRUCTIONS This appliance must be correctly installed by a suitable qualified person strictly in accordance with the manufacturer's instructions. The manufacturer's declines any responsibility for injury or damage to persons or property as a result of improper installation of this appliance. The housing, adjacent furniture and all materials used in installation must be able to withstand a minimum temperature of 85°C plus ambient during periods of operation.
Note: in both of the above cases you must measure 717 mm from the underside of the worktop and mark the correct position of the lower support brackets before fixing them to the sides. With reference to (fig.3-page 9), ensure the side support brackets are positioned 40 mm from the front of the cabinet door exterior surface, as illustrated, before securing them to the cabinet sides. If necessary, this product can be installed in a housing unit (fig.2 - page 9).
INSTALLATION NOTE: Fig. 1 Fig. 3 50-80 mm Fig. 2 Fig.
ELECTRICAL REQUIREMENTS WARNING: THIS APPLIANCE MUST BE EARTHED Electrical installation must comply with all relevant local and national regulations. Make sure that the voltage supply is the same as the rating given on the data plate positioned on the lower part of the front of the oven. This appliance must be connected to an a.c. single phase 230 V 50Hz electricity supply. The total rated load is 4.12 kW.
11
PROGRAMMING YOUR OVEN WITH MECHANICAL 60 MINUTES TIMER (only B721BL-A, B721W-A, B722SS-A) The regulating knob must be turned in a clockwise direction until it reaches the 60 minutes position and then turned to the desired time by turning the knob in a counter clockwise direction. The oven will not be turned off automatically. A minute counter ringing will advise that the cooking time is over.
USING THE 5 BUTTON ELECTRONIC TIMER (only B723SS-A - B724SS-A) Description of button functions: POT SYMBOL $872 AUTO SYMB OL 1. 2. 3. 4. 5. BELL SYMB OL Minute Minder Cooking on auto-function (duration) End of Cooking time (end time) Reducing numbers in all programs Increasing numbers in all programs (please note the buttons have been numbered for illustration only) 11 2 3 4 5 The timer only operates when the appliance is connected to the electricity supply.
5) MINUTE MINDER MODE: Briefly press the ‘Minute Minder’ button (1). Set the required time by pressing the + or – buttons. The ‘bell’ symbol is displayed. When the set time has elapsed, an audible signal is emitted, to cancel the alarm mode press the ‘end time’ button (3). The minute Minder does not control any of the oven functions. NOTES: x If a setting error is made, this will be indicated by an audible signal and the ‘A’ symbol will flash.
BEFORE THE FIRST USE Remove any packaging and the accessories from the oven. Wipe the oven interior using hot water and mild detergent. Rinse carefully using damp cloth. Wash the oven shelves and accessories in a dishwasher or using hot water and a mild detergent, and dry thorouhgly. Slide the oven shelves and the oven pan onto the runners, close the door and heat the oven to maximum temperature for 30 minutes to eliminate any residues from the manufacturing process.
OPERATING INSTRUCTIONS Conventional oven (Top oven) - all models Main functions Conventional cooking Variable control grilling Interior light Convection mode (outer section only on top element). This traditional cooking mode is achieved by selecting the desired cooking temperature within the given 50°C to 230°C. The amber light will automatically switch off once the desired temperature is achieved. It is advisable to preheat the oven for a few minutes before use.
Top heating element only (outer section only) This cooking mode is particularly suited for delicate food, for browning and keeping dishes warm AFTER cooking time. Temperature target of 250°C, will be automatically achieved and maintained. Lower heating element This particular function is ideal for warming meals or for slow cooking. Temperature target of 250°C, will be automatically achieved and maintained. WARNING Grilling must take place with the door open (top oven only).
Main fan oven (Lower cavity) only B721BL-A, B721W-A, B722SS-A, B724SS-A Main Function Fan oven cooking. Select the desired temperature between 50°C-230°C. The fan main function is to circulate the heated air through the oven cavity and achieve even heat distribution. The correct temperature is achieved a little faster than convection cooking and more economically. This allows different dishes to be cooked on different levels at same time, but some turning of food may be necessary at times.
LOWER CAVITY FUNCTIONS (only B723SS-A) Temperature selector knob: select the desired temperature between 50°C and 230°C. Selector knob: OVEN LIGHT The oven light remains on whilst the oven is in use. FAN ASSISTED LOWER ELEMENT MODE This provides semi-convection heating with lower element for delicate dishes. CONVECTION MODE This provides traditional cooking with heat from the top and bottom elements.
GRILL MODE This is for grilling smaller items of food. Keep the oven door closed. DOUBLE GRILL MODE To cook meat and for making toast. Preheat the oven for 5 min. with the door closed. When cooking, keep the oven door closed. FAN ASSISTED GRILL MODE This provides quick browning to seal juices in the food. Both the grill and the fan come on. Most of the cooking is done by grilling and the hot air is circulated around the oven. The oven door must be kept closed.
COOKING GUIDE TOP OVEN FOOD Function Preheating Level (from the bottom) Temperature (°C) Cooking time min. Chicken yes 1 200 55 - 65 Steak and kidney pie yes 1 180 110 - 120 Victoria sandwich cake yes 2 180 25 - 35 Semi-rich fruit cake yes 2 140 170 - 200 COOKING TABLE FOR GRILL FUNCTION FOOD Function Preheating Grill power level Cooking time min.
CLEANING AND MAINTENANCE Important: do not use water pressure cleaners or steam cleaners. Exterior of the oven Clean with a damp cloth. If it is very dirty, add a few drops of washing up detergent to the water. Wipe with a dry cloth. Do not use corrosive or abrasive detergents, which dull the surface. In the event that one of these products comes into contact with the oven, immediately clean it using a damp cloth.
WHAT TO DO IN THE EVENT OF A FAULT This appliance must only be repaired by a qualified technician appointed by the manufacturer. Unauthorised repairs could be dangerous and would invalidate any warranty. The oven does not work at all Check that the electricity supply is connected and switched on. Has the fuse blown? If so, replace with correct type.
TECHNICAL DATA This fitting conforms with laws regarding radio interfence. ELEMENT RATING LOWER OVEN: FAN MOTOR (all models) CIRCULAR HEATING (all models) LOWER HEATING (B723SS-A only) UPPER HEATING (B723SS-A only) GRILL HEATING (B723SS-A only) 0,020 kW 2,0 kW 1,3 kW 0,6 kW 1,4 kW UPPER OVEN: LOWER HEATING (all models) UPPER HEATING (all models) GRILL HEATING (all models) 1,3 kW 0,6 kW 1,4 kW 2 OVEN LIGHTS 0,025 kW 2 COOLING MOTORS 0,020 kW ELECTRICAL SUPPLY: 230 V a.c.
BAUMATIC LTD. - CONDITIONS OF GUARANTEE. Dear Customer, The conditions of guarantee which apply to your Baumatic appliance are as follows: This product is guaranteed for 12 months from the date of original purchase. Baumatic Ltd will repair any defect that arises due to faulty materials or workmanship free of charge during this period. * * In addition, your appliance is covered by a 5 year parts warranty.
26 Cod.
Baumatic www.baumatic.