User manual

Spin reduction button

Your washing machine will automatically select an appropriate spin

speed for each wash program. However it is possible to decrease

the spin speed that it automatically selects, by pressing the spin

reduction button.

9 Turn the wash program selection knob to the wash program

that you want to use.

9 Press the spin selection button and the spin speed will reduce

in 100 rpm increments.

o It is possible to reduce the spin speed from the one

automatically selected by the wash program, down to

400rpm.

9 If you continue to press the spin reduction button after

400rpm appears. Then

will appear in the LCD display. This

means that the “No spin” option has been selected and at the

end of the wash cycle, the machine will not spin at all and the

wash program will finish after it has drained.

9 If you press the spin

reduction button again,

then

will appear in the

LCD display. This means

that the “Anti-crease”

option has been selected.

The clothes will be held in

water, until you select a

spin or drain program.

YOU MUST DO THIS BEFORE OPENING THE DOOR OF THE

APPLIANCE.