User manual

Turn the filter a quarter turn anti clockwise, water will
start to come out of the drain pump. Continue to turn the
filter anti clockwise until you reach a half turn, more
water will come out of the drain pump.
When all the water has drained
out of the washing machine,
turn the filter several times anti
clockwise, until it can be
removed completely.
Remove the filter and rinse out
the filter under the tap.
Remove any debris from the
filter.
Remove any debris that is in the area of the appliance that you
removed the drain pump filter from.
Screw the filter clockwise back into position, making sure that it is fully
tightened. You should keep turning until you cannot turn it any further.
Refit the filter cap.
IMPORTANT: Do not perform this operation if the appliance has
stuck on a cycle, until the water inside the machine has cooled
sufficiently. Otherwise the water that comes out of the drain
pump filter may still be hot.
30