User manual

Locating your washer dryer
o Before commencing installation, check
the location where you intend to install
the appliance. You should make sure that
you have everything in place that is
necessary for the correct installation.
o Do not place or store your washer dryer in a location where the
ambient temperature could fall below 0°C, otherwise the water
in it could freeze up.
o Never place or store laundry products on top of the appliance.
o Install the washer on a flat, solid floor. If the washer is installed
on an uneven or suspended floor, it could cause excessive noise
and severe vibration, which may result in the malfunction of the
appliance.
o You should also level off the washer dryer, using the adjustable
feet on the base of the appliance.
o There should be a gap of 2 cm either side of the washer dryer; a
10 cm gap should be left behind the appliance.
Connecting to the mains water supply
IMPORTANT: The washer dryer should never be connected to the
water mains using an existing inlet hose, YOU MUST utilise the inlet
hose that is provided with the appliance.
Your appliance should only be connected to a cold water supply.
33