BFW440 dual temperature electronic wine cooler
USER MANUAL FOR YOUR BAUMATIC BFW440 44 Bottle dual temperature electronic wine cooler NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference, for you or any person not familiar with the operation of the appliance.
Contents Environmental note 4 Important safety information 5–6 Specifications of your wine cooler Description of the appliance Control panel Description of the product features 7 8 8 9-10 Using your Baumatic wine cooler Before switching on During first use Switching on the appliance and setting the temperature Changing between Fahrenheit and Celsius Interior lights Locking and unlocking the control panel Stand-by mode 10-13 10-11 11 11-12 12 12 13 13 Storing your wines Wine storage problems 13-14 1
Environmental note Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance. o The packaging materials that Baumatic uses are environmentally friendly and can be recycled.
Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Technical Department. IMPORTANT: Any installation work must be carried out by a qualified electrician or competent person. Use of the appliance o Your appliance is only designed to be used in the home.
Child safety o Packaging material should be kept away from children. o Children should not be allowed to touch the controls or play with the appliance. General safety o Do not pull on the power supply cable to remove the plug from your mains supply socket. o Do not pull out or insert the plug with wet hands. o Do not attempt to use your appliance outdoors or any place where it is likely to come into contact with the elements.
Specifications of your wine cooler Congratulations on purchasing a Baumatic wine cooler o o o o o o o o o o o o o Gross capacity: 171 litres Net capacity: 155 litres Bottle capacity: 44 x 0.
Description of the appliance 1) 2) 3) 4) 5) 6) 7) Interior light Electric fan Cooling zone partition Rear wall Wire shelf Door handle Cooling zone partition gasket 8) Glass door Control panel The control panel is located on the front of the glass door.
Description of the product features 1) Control panel o The touch control panel is located on the front of the glass door, which means it is easy to set the temperature of the appliance and see what temperature each zone is set to. 2) Two cooling zones o There are two cooling zones inside of your wine cooler; they are separated by a partition. o Each cooling zone has an independent temperature control and temperature display. o The upper cooling zone can hold up to 16 x 0.75 litre bottles.
o The bottom rack in the lower zone consists of two levels; each level can hold up to 6 bottles. 6) The wine cooler shelves o All of the full depth shelves have tabs that lock into both sides of the cabinet of the wine cooler. o Any of the shelves can be removed, to accommodate larger bottles of wine. Removing a shelf o Remove all of the bottles from the shelf that you want to remove. o Lift the shelf upwards and then gently pull the shelf away from the wine cooler.
o The outside of the appliance and the removable accessories contained within it, should be cleaned with a solution of liquid detergent and water. o The interior of the appliance should be cleaned with a solution of sodium bicarbonate dissolved in lukewarm water. The interior and accessories should be thoroughly dried, after the cleaning process has been completed. o There can be an odour when you first switch on the appliance. It will lessen as the appliance starts to cool.
o Each time you press either the or button, the temperature of a particular zone will adjust by one degree. If you press and hold down either the or button, the temperature will adjust by one degree every half a second. o The button will increase the temperature of a zone. The button will decrease the temperature of a zone. o Whilst you are setting the temperature of a zone, the corresponding temperature display will flash.
Locking and unlocking the control panel o If no button on the display panel is pressed for one minute, then all of the buttons will lock automatically, apart from the control panel lock on/off button (10). o The control panel lock neon (5) on the display will light. o If you press any button on the display, the control panel lock neon (5) will flash to remind you that the control panel is locked.
o Exposure to light, vibrations or fluctuations in temperature and humidity can all cause wine to spoil. When properly stored, wines not only maintain their quality but many will actually improve in aroma, flavour and complexity as they mature. o Wines kept at a higher temperature will age faster. Wine that is exposed to temperatures that are greater than 21°C (70°F) will suffer from poorer flavour and aroma. o If wine is kept at too low a temperature, this can result in the development of harmful deposits.
Wine storage problems Corking- a tiny percentage of bottled wine (about 1%) will suffer from this. The cork reacts with the wine and gives it a musty, unpleasant taste. It is the most common wine storage problem and is caused by harmless bacteria growing on the cork. As unfortunate as this is, there is nothing to do but to discard all of the wine in the affected bottle. This is not to be confused with small fragments of cork floating in the wine itself, which will not impair the flavour.
Cleaning and maintenance WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO CLEAN IT. o Do not clean the appliance by pouring water onto it or spraying water over it. o The interior of the wine cooler should be cleaned periodically, using a solution of bicarbonate of soda and lukewarm water. o Clean the accessories separately with soap and water. Do not clean them in a dishwasher. o Do not use abrasive products, detergents or soaps.
Defrosting o Defrosting occurs automatically inside of the wine cooler during operation. The defrost water is collected by the evaporating tray and evaporates automatically. o The evaporating tray and defrost water drain hole should be cleaned periodically. This will prevent water from collecting in the bottom of the wine cooler, instead of flowing down the defrost drainage channel and drain hole. o You can also pour a small amount of water down the drain hole to clean inside of it.
o The wiring in the mains lead is coloured as follows: Brown Blue Green and yellow Live Neutral Earth o As the colours of the wires in the appliance’s mains lead may not correspond with the coloured markings identifying the terminals in your spur box, please proceed as follows: The brown wire must be connected to the terminal marked “L” (live), or coloured red. The blue wire must be connected to the terminal marked “N” (neutral), or coloured black.
o Place the appliance flatly and firmly on a solid base. The appliance is fitted with adjustable feet on the front side, which can be used to level the appliance. o If you are placing another cooling appliance next door to this product, then there must be a gap of at least 2cm between the appliances. This will help to prevent condensation from forming. o Be sure to leave enough space for the opening of the door, to avoid damage to the appliance or personal injury.
Troubleshooting IMPORTANT: If your wine cooler appears not to be operating properly, before contacting the Baumatic Service Department, please refer to the checklist below. PROBLEM Appliance does not operate Temperature inside the appliance is too warm. Temperature inside the appliance is too cold Vibration Moisture is forming on the inside of the appliance. Moisture is forming on the outside of the appliance. POSSIBLE CAUSE Not plugged in. The circuit breaker has tripped or the fuse has blown.
Abnormal display on the control panel. E1 on the upper zone temperature display indicates an error of the temperature sensor for the upper zone. E2 on the lower zone temperature display indicates an error of the temperature sensor for the lower zone. E3 on the upper zone temperature display indicates an error of the upper electric fan. E4 on the lower zone temperature display indicates an error of the lower electric fan.
United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Czech Republic Baumatic CR spol s.r.o. Amperova 495 46215, Librec Czech Republic Sales Telephone (0118) 933 6900 Sales Fax (0118) 931 0035 Service Telephone (0118) 933 6911 Service Fax (0118) 986 9124 Spares Telephone (01235) 437244 Technical Advice Telephone (0118) 933 6933 www.baumatic.cz E-mail: sales@baumatic.co.uk technical@baumatic.co.uk Website: www.baumatic.co.
