User manual

10
First remove the grille by pulling down on it. Undo the
side catches.
You can now clean the anti-grease filter grilles.
 Soak them for about one hour in hot water with a
grease-loosening detergent then rinse off thoroughly
with hot water.
 Repeat the process if needed. Refit the grease grille
once it has dried.
 Refit the grease grilles when dry.
Let the filter grilles dry thoroughly before refitting
them.
a) Changing the LIGHT BULB
 Disconnect the hood from the power supply.
 Access the lamp area. Please note that you will have to take off the
grease grille at the back to access the lamp area.
 Always replace burnt-out bulbs with olive-shaped 40 Watt bulbs.
 After replacing the bulb, put the grease grille back.
_____________________________________________________________
b) Changing the CARBON FILTER
You will find that one filter will attach over the front of the fan motor (please
see figure at bottom of page).
Maintenance – Changing the Light Bulb and Carbon Filter
Maintenance - Cleaning the Anti-grease Filters
on: Please Read this before installing & using.