User manual
9
1) Your Cooker Hood should only be fitted into the underside of a dedicated
cabinet / kitchen unit. DO NOT position it any less than 700 mm (70 cm)
above the hob or let other cabinets overhang the hob.
2) Remove the metal anti-grease grille.
3) Drill where indicated. SEE DIAGRAMS BELOW. Using a drill with a
diameter of 6mm, make holes to line up with the screw holes on the
cooker hoodâs fixing surfaces (see Fig. below).
4) Insert rawlplugs into the holes and work screws in partway. Adjust your
cooker hood so that it is straight using the spacer (âFâ in figure below).
5) Once you have ensured the unit will be able to sit properly (& is connected
to the ducting, if using as an extraction fan), tighten the screws to secure.
A).
B).
60
194
516
Air exhaust device
Outdoor discharge: Turn the hand shanks of air exhaust to outdoor, open
cooker hood, then the odours will be removed from the air exhaust hole
outdoor.
Indoor discharge: Turn the hand shanks of are exhaust to indoor, open
cooker hood, then the odours will be removed from the air exhaust hole
indoor.
A).
B).