GELATO1SS 1.
USER MANUAL FOR YOUR BAUMATIC GELATO1SS 1.5 Litre freestanding automatic ice cream and sorbet maker NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference, for you or any person not familiar with the operation of the appliance.
Contents Environmental note 4 Important safety information 5–6 Specifications of your GELATO1SS Description of the appliance 7 7 Using your Baumatic ice cream maker Before switching on Prior to making ice cream Making ice cream Removal and storage of ice cream Extended cooling function Adjusting settings 8-11 8 8–9 9 10 11 11 Installation Electrical connection (UK only) Electrical connection (European countries) Positioning 12-13 12 13 14 Contact details Guarantee 14-15 14 3
Environmental note Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance. o The packaging materials that Baumatic uses are environmentally friendly and can be recycled.
Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Advice Line. IMPORTANT: Any installation work must be carried out by a qualified electrician or competent person. Use of the appliance o Your appliance is only designed to be used in the home.
Child safety o Packaging material should be kept away from children. o Children should not be allowed to touch the controls or play with the appliance. General safety o Do not pull on the power supply cable to remove the plug from your mains supply socket. o Do not pull out or insert the plug with wet hands. o Do not attempt to use your appliance outdoors or any place where it is likely to come into contact with the elements.
Specifications of your GELATO1SS Congratulations on purchasing a Baumatic ice cream maker o o o o o o o o o Push button/control knob operation Capacity: 1.
Using your Baumatic ice cream maker Before switching on o Make sure that it has been installed by a suitably qualified person, as per the information contained in Baumatic’s installation instructions. o After delivery, wait for a couple of hours before connecting the appliance to your mains supply. This will allow any oil from the compressor that may have been disturbed during the transportation process to settle.
o IMPORTANT: DO NOT fill the removable bowl more than 80% full, as the contents will expand during the cooling process and there is the chance of the bowl overflowing. o Place the removable bowl inside of the fixed bowl and then place the mixing arm inside of the removable bowl. The mixing arm should just rest inside the centre of the bowl, with the circle side facing upwards. o Insert the mixing arm into the socket that is found in the base of the motor section.
Removal and storage of ice cream IMPORTANT: Before attempting to remove the ice cream, YOU MUST disconnect the appliance from your mains supply. o Take out the removable bowl from the fixed bowl. o The removable bowl should not be used for long term storage of ice cream in a freezer. The maximum time period that the removable bowl should be placed in a freezer for is 30 minutes. If the removable bowl is placed in a freezer for longer than this, it may be damaged.
Extended cooling function o After the ice cream making process has completed, if the appliance is not switched off within 10 minutes, then it will enter the extended cooling function. o The extended cooling function will keep the ice cream frozen and stop it from defrosting. o The extended cooling function will run for a maximum of 1 hour, after which the appliance will enter stand-by mode. After 1 hour, the ice cream will no longer remain frozen.
Installation Electrical connection (UK only) o Your ice cream maker comes supplied with a 13 amp plug fitted. If in future you need to change the fuse in this plug, then a 13 amp ASTA approved (BS 1362) fuse must be used.
Electrical connection (European countries) Your ice cream maker comes supplied with a European plug. o As the colours of the wires in the appliance’s mains lead may not correspond with the coloured markings identifying the terminals in your spur box, please proceed as follows:The brown wire must be connected to the right hand terminal. The blue wire must be connected to the left hand terminal. o When the connection is completed, no stray strands or cut wire should be present.
IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact Baumatic Customer Care on telephone number (0118) 933 6911 for guidance. * If you are not based in the UK, then please refer to the telephone number for the relevant Baumatic country on the next page for guidance. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. IMPORTANT: Baumatic Ltd.
United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Czech Republic Baumatic CR spol s.r.o. Průmyslová zóna Sever 696 460 11 Liberec 11 Czech Republic Sales Telephone (0118) 933 6900 Sales Fax (0118) 931 0035 Customer Care Telephone (0118) 933 6911 Customer Care Fax (0118) 986 9124 Spares Telephone (01235) 437244 Advice Line Telephone (0118) 933 6933 www.baumatic.cz E-mail: sales@baumatic.co.uk customercare@baumatic.co.uk spares@baumatic.co.
