User manual

9
o IMPORTANT: DO NOT fill the removable bowl more than 80%
full, as the contents will expand during the cooling process and
there is the chance of the bowl overflowing.
o Place the removable bowl inside of the fixed bowl and then place
the mixing arm inside of the removable bowl. The mixing arm
should just rest inside the centre of the bowl, with the circle side
facing upwards.
o Insert the mixing arm into the socket that is found in the base of
the motor section. IMPORTANT: You must ensure that the
mixing arm is securely fixed into the socket.
o Place the transparent cover on the top of the appliance, making
sure that it is firmly fixed in position. Finally make sure that the
small lid is securely in place on the transparent cover.
Making ice cream
o Connect your appliance to your mains supply, making sure that
the electrical connection information contained in this booklet
has been read and followed.
o Press the ON/OFF button and then set the required time by
turning the timer dial.
o A 40 minute time setting will give soft textured ice cream, the
default operating time of 50 minutes will give medium textured
ice cream and a 60 minute time setting will give hard textured
ice cream.
o The LCD display will show the temperature progressively
decreasing as the appliance begins to function. It will indicate
that it has entered its cooling phase by showing the temperature
it’s reached.
o When the countdown period ends, the cooling process will end
automatically and an audible signal will sound.
o Switch the appliance off using the ON/OFF button and unplug the
appliance from your mains supply.