User manual

o Disconnect the light wiring point and remove the bulb holders

and wiring from the hood. IMPORTANT: It is not possible to

replace the bulbs individually, it will be necessary to obtain the

bulbs, bulb holders and wiring as a complete part. This is

available from our Spares Department.

o Fit the replacement bulbs, bulb holders and wiring in the same

manner as the originals.

o Reconnect the light wiring point.

o IMPORTANT: Defective bulbs should be replaced immediately.

o If the lights still do not work, make sure that the lamps are fitted

properly into their housings before you call for technical

assistance.

o Slide the glass cover downwards and then fully retighten the

screws at the top of the cooker hood.