User manual

o First remove the grease filter by
pulling down on the handle and
pulling it away from the cooker
hood.
o Disconnect the light wiring point and using a screw driver
remove the bulb holders and wiring from the hood.
IMPORTANT: It is not possible to replace the bulbs individually,
it will be necessary to obtain the bulbs, bulb holders and wiring
as a complete part. This is available from our Spares
Department.
o Fit the replacement bulbs, bulb holders and wiring in the same
manner as the originals.
o Reconnect the light wiring point.
o IMPORTANT: Defective bulbs should be replaced immediately.
o If the light or lights still do not work, make sure that the lamps
are fitted properly into their housings before you call for
technical assistance.
o Refit the grease filter.
14