P610SS Fan oven P620BL/SS & P630SS 60 cm Multifunction built in oven.
User Manual for your Baumatic P610SS 4 Function 60 cm fan oven P620BL/SS 7 Function 60 cm multifunction oven P630SS 9 Function 60 cm multifunction oven NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference; for you or any person not familiar with the operation of the appliance.
Contents Environmental note 4 Important safety information 5–7 Specifications P610SS P620BL/SS P630SS Electrical details Cooling fan Control panel Oven programmer/timer display 8-13 8 9 10 11 11 12-13 13 Setting and using the oven programmer/timer Selecting manual operation mode Setting the time of day Before first use Setting the minute minder function Setting the duration function Setting the end cook function Setting the start and end time function Adjusting the audible signal 13-18 13 13 14 14 15
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment.
IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Customer Care Department. General Information o This appliance is designed for domestic household use and can be built into a standard kitchen cabinet or housing unit.
Warning and safety instructions o This appliance complies with all current European safety legislation. Baumatic do wish to emphasise that this compliance does not remove the fact that the appliance surfaces will become hot during use and retain heat after operation. Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time.
Installation This appliance must be correctly installed by a suitably qualified person, strictly in accordance with the manufacturer’s instructions. o Baumatic Ltd. declines any responsibility for injury or damage, to person or property, as a result of improper use or installation of this appliance. o Heat, steam and moisture will be created during use of the appliance, take care to avoid injury and ensure that the room is adequately ventilated.
Specifications P610SS Product Dimensions Height: Width: Depth: 600 mm 598 mm 565.
P620BL/SS Product Dimensions Height: Width: Depth: 600 mm 598 mm 565.
P630SS Product Dimensions Height: Width: Depth: 600 mm 598 mm 565.
Electrical details Rated Voltage: Supply Connection: Max Rated Inputs: Mains Supply Lead: Oven Light Bulb: 220 - 240 Vac 50 - 60 Hz (P610SS & P620BL/SS) 220 – 240 Vac 50 Hz (P630SS) 13 A (double pole switched fused outlet with 3mm contact gap 1.55 – 1.80 kW (P610SS) 2.15 – 2.55 kW (P620BL/SS & P630SS) 3 x 1.5mm² 25 W/300°C screw type pygmy For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice.
Control Panel P610SS P620BL/SS P630SS 12
1) 2) 3) 4) 5) 6) Oven function selector knob Power indicator light Oven programmer/timer Oven operating light Thermostat control knob Timer minute minder button 7) Timer duration button 8) Timer end cook button 9) Timer manual operation button 10) Timer minus button 11) Timer plus button Oven programmer/timer display 12) 13) 14) “Auto” function symbol “Minute minder” symbol “Manual operation” symbol.
Before first use o To remove any residue from the oven that may have been left from the manufacturing process, you should select either the fan or conventional oven function and turn the thermostat dial to its maximum temperature setting. o It is perfectly normal for a smell to be produced during this process. o You should make sure that any windows in the room are left open during this process. o It is advisable for you not to remain in the room whilst the burning off process is taking place.
Setting the duration function This function will allow you to set a countdown time similar to the minute minder function. However the oven will no longer continue to heat, once the countdown period has elapsed. o Use the thermostat control knob (5) to set the temperature that you require. The manual operation symbol (14) will appear on the display. o Use the oven function selector knob (1) to select the mode of cooking that you require.
Setting the end cook function This function is similar to the duration function, however instead of selecting a period of time that you wish the oven to switch off after. You select the time of day that you wish the oven to switch off at. o Use the thermostat control knob (5) to set the temperature that you require. The manual operation symbol (14) will appear on the display. o Use the oven function selector knob (1) to select the mode of cooking that you require.
Setting the start and end time function This function will allow you to set a time in the future that the oven switches on at and a time that the oven will switch off at. o Use the thermostat control knob (5) to set the temperature that you require. The manual operation symbol (14) will appear on the display. o Use the oven function selector knob (1) to select the mode of cooking that you require. o Press the duration button (7) and the display will show a value of 00:00.
o Press the minus button again and the audible signal will adjust to the next level. o When the required level of audible signal is reached, release the minus button and it will be set. Selecting a cooking function and temperature Selecting manual operation mode After your appliance is connected to your mains supply for the first time, the numbers on the timer display will flash. Before you can select a cooking function or set a temperature, you must set the appliance into “manual operation” mode.
P610SS, P620BL/SS and P630SS standard oven functions DEFROST MODE: The fan runs without heat to reduce the defrosting time of frozen foods. The time required to defrost the food will depend on the room temperature, the quantity and type of food. Always check food packaging for the defrosting instructions. FAN OVEN: This method of cooking uses the circular element while the heat is distributed by the fan. This results in a faster and more economical cooking process.
P630SS additional functions OVEN LIGHT: Separate light control which allows the light to be switched on, even when the oven is switched off. CONVECTION OVEN AND FAN: This method of cooking provides traditional cooking with heat from the top and the lower element, it also utilises the circulation fan. This ensures a fast and even distribution of the heat. Suitable for light and delicate baking, such as pastries. For the P620SS the oven light will switch on automatically when an oven function is selected.
Cooking guidelines o Please refer to the information given on food packaging for guidance on cooking temperatures and times. Once familiar with the performance of your appliance, temperatures and times can be varied to suit personal preference. o If you are using the fan oven function, then you should follow the information given on the food packaging for this particular mode of cooking. o You should pre-heat the oven and not place food inside of it until the oven operating light has gone off.
Warnings o Keep the oven door closed when using any of the cooking functions, including the grill functions. o Do not use aluminium foil to cover the grill pan or heat items wrapped in aluminium foil under the grill. The high reflectivity of the foil could potentially damage the grill element. o You should also never line the base of your oven with aluminium foil. o During cooking, never place pans or cookware directly onto the bottom of your oven. They should always be placed on the shelves provided.
Cleaning and maintenance Cleaning operations must only be carried out when the oven is cool. The appliance should be disconnected from your mains supply before commencing any cleaning process. o The oven should be thoroughly cleaned before it is operated for the first time and after each use. This will avoid residual food stuffs becoming baked on the oven cavity. After residues have been baked on several times, they are far more difficult to remove. o Never clean the oven surfaces by steam cleaning.
Replacing the oven bulb IMPORTANT: The oven must be disconnected from your mains supply before you attempt to either remove or replace the oven bulb. o Remove all oven shelves, the drip tray and the side rack that is on the same side as the oven light. o Remove the clockwise. light cover by turning it anti- o Unscrew the bulb clockwise and remove it from its holder. o Replace the bulb with a 25 W/300°C, screw type pygmy. o Do not use any other type of bulb. o Place the lamp cover back into position.
Removing the oven door for cleaning To facilitate the cleaning of the inside of the oven and the outer frame of the oven, the door can be removed as follows:o The hinges (A) have two movable bolts on them (B). o If you raise both of the movable bolts (B), then the hinges (A) are released from the oven housing. o You should grip the sides of the door at the centre and then incline it slightly towards the oven cavity and then by pulling it gently away from the oven cavity.
Removing the inner door glass for cleaning o Do not use any abrasive cleaner that could cause damage. o Remember that if the surface of the glass panel becomes scratched, this could lead to a dangerous failure. o To facilitate cleaning, the inner door glass can be lifted out. P630SS o To facilitate cleaning, the door glass can be lifted out. o Open the door of the oven to a 45° angle. o There is a plastic sealing section at the top of the oven door, which has 4 small slots in it.
o Follow the same procedure for the inner door glass. P610SS and P620SS/BL o Remove the oven door following the steps outlined in the “Removing the oven door for cleaning” section on page 25. o There is a plastic sealing section at the top of the oven door, which has 4 small slots in it.
o Place a coin horizontally into one of the small slots and rotate the coin clockwise. You will feel part of the plastic sealing section disengage from the door. o Repeat this process for the other slots and you will be able to lift the plastic sealing section away from the top of the door. o This will allow you to access the inner door glasses. o Carefully slide out the middle door glass removing it from the oven door.
Before connecting the appliance, make sure that the supply voltage marked on the rating plate corresponds with your mains supply voltage. WARNING: THIS APPLIANCE MUST BE EARTHED. o This appliance should be wired into a 13 A double pole switched fused spur outlet, having 3 mm contact separation and placed in an easily accessible position adjacent to the appliance. The spur outlet must still be accessible even when your oven is located in its housing.
Installing the oven into the kitchen cabinet Positioning the appliance o Ensure that the aperture that you will be fitting the oven into is of the size given in the above diagram. o The oven must be fitted into an oven housing with the ventilation cut-outs shown in the “Ventilation requirements” section on the next page. o Ensure that the rear panel of the furniture housing unit has been removed.
(Figure shows the ventilation and cut-out requirements for the installation of the appliance into a standard kitchen unit). (Figure shows the ventilation and cutout requirements for the installation of the appliance into a tall housing unit). o Ensure that the oven has been securely fixed into the housing unit. The fixing of the oven into the housing is made by using four screws. These should be screwed through the oven cabinet and into the housing unit.
My appliance isn’t working correctly o The oven isn’t coming on. * Check that the oven is in manual operation mode. * Check that you have selected a cooking function and a cooking temperature. o There appears to be no power to the oven and grill. * Check that the appliance has been connected to the electrical mains supply correctly. * Check that the mains fuses are in working order.
o The oven light is not working. * Refer to page 24 and follow the “Replacing the oven bulb” section. o I am getting condensation in my oven. * Steam and condensation is a natural by product of cooking any food with high water content, such as frozen food, chicken etc. * You may get condensation in the oven cavity and forming between the oven door glasses. This is not necessarily a sign that the oven is not working correctly.
IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact Baumatic Customer Care on telephone number (0118) 933 6911. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. Please note that if an engineer is asked to attend whilst the product is under guarantee and finds that the problem is not the result of an appliance fault, then you may be liable for the cost of the call out charge.
Baumatic Consumables o BC001 Degreaser for Dishwashers (200 g) o BC002 Descaler for Washing Machines and Dishwashers (200 g) o BC003 Ceramic Hob Cleaner (250 ml) o BC004 Oven Cleaner (250 ml) o BC005 Stainless Steel Cleaner and Protector (250 ml) o BC007 E-Cloth – General Purpose Cloth o BC008 Microwave Cover To order a Baumatic consumable product please call 0123 5437 244 and quote the product code. You can also order online from eshop.baumatic.co.
United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sales Fax (0118) 931 0035 Customer Care Telephone (0118) 933 6911 Customer Care Fax (0118) 986 9124 Spares Telephone (01235) 437244 Advice Line Telephone (0118) 933 6933 Czech Republic Baumatic CR spol s.r.o. Lìpovà 665 460 01 Liberec 4 Czech Republic +420 483 577 200 U www.baumatic.cz U U U U U E-mail: sales@baumatic.co.uk customercare@baumatic.co.
