BO670SS-AUS 60cm Multifunction Built-in Oven with Joystick Control 1
User Manual for your Baumatic BO670SS-AUS 60cm Multifunction Pyrolytic Built-in Oven with Joystick Control NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference; for you or any person not familiar with the operation of the appliance.
Contents Environmental note 5 Important safety information 6–8 Specifications Product and aperture dimensions Product specifications Standard accessories Electrical details Cooling fan Control panel The joystick control knob 9 - 13 9 9 9 10 10 11 - 12 12 - 13 Before first use Setting the time of day Oven burn-off 13 - 14 13 14 Selecting a cooking function and temperature Switching the oven on Switching the oven off Selecting an oven function Adjusting the oven temperature Oven functions PRH (Rapid p
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment.
IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Retailer where you purchased your unit from. General Information o This appliance is designed for domestic household use and can be built into a standard kitchen cabinet or housing unit.
Warning and safety instructions o This appliance complies with all current European safety legislation. Baumatic do wish to emphasise that this compliance does not remove the fact that the appliance surfaces will become hot during use and retain heat after operation. Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time.
o IMPORTANT: The appliance must be disconnected from the mains before following the cleaning procedure. Installation This appliance must be correctly installed by a suitably qualified person, strictly in accordance with the manufacturer’s instructions. o Baumatic Ltd. declines any responsibility for injury or damage, to person or property, as a result of improper use or installation of this appliance.
Specifications Product Dimensions Height: Width: Depth: 600.3 mm 598 mm 565.
Electrical details Rated Voltage: 220 - 240 Vac Supply Connection: 20 A (double pole switched fused outlet with 3mm contact gap) Max Rated Inputs: 3.30 kW Frequency: 50 – 60 Hz Mains Supply Lead: 3 x 1.5 mm² Oven Light Bulb: 25 W/500°C screw type pygmy For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice.
Control Panel Left hand display 1) 2) 3) 4) 5) 6) Oven function display Oven temperature display Minute minder symbol Duration symbol End cook symbol Timer display 11
Right hand display 7) 8) 9) 10) 11) Recipe number Flan recipes Fish recipes Bread/pizza recipes Meat recipes The joystick control knob 12) 13) 14) 15) 16) ON/OFF segment Recipe segment Timer segment Oven temperature segment Cooking function segment 12
o The joystick control knob should be used to access the various setting options that appear in the segments around it. o You should press the oven selector control knob once to activate it. o As you turn the joystick control knob, the segments around the outside of it will light. o To confirm the menu that you want to access, you should press the joystick control knob once when the relevant segment is lit.
Oven burn-off o To remove any residue from the oven that may have been left from the manufacturing process, you should select either the fan or conventional oven function and set the thermostat to its maximum temperature setting. o It is perfectly normal for a smell to be produced during this process. o You should make sure that any windows in the room are left open during this process. o It is advisable for you not to remain in the room whilst the burning off process is taking place.
o Press the oven selector control knob once. The word “OFF” will appear on the LED display followed by an audible “beep”. Selecting an oven function o Once the oven is switched on, turn the joystick control knob until the cooking function segment (MENU) is lit. o Press the joystick control knob once to select the MENU segment. The oven function display (1) will show the cooking function that is currently selected.
o Whilst the oven is heating to the temperature that you have set, the letter “C” and the “°” symbol will flash. When these symbols remain fixed, the oven has reached temperature. o You should not place food inside of the oven cavity until the appliance has reached the temperature that you set. o IMPORTANT: For the PRH (preheating) and ETC (cleaning) functions, it is not possible to adjust the temperature.
BOTTOM ELEMENT This method of cooking uses the lower element to direct heat upwards to the food. This function is suitable for slowcooking recipes or for warming up meals. 50 - 250°C 80°C FAN OVEN This method of cooking uses the circular element while the heat is distributed by the fan. This results in a faster and more economical cooking process. The fan oven allows food to be cooked simultaneously on different shelves, preventing the transmission of smells and tastes from one dish onto another.
CENTRE GRILL GRILL WITH FAN SELF CLEANING FUNCTION element, whilst the heat is distributed by the fan. This reproduces the same conditions as a traditional clay wood-fire stove. This cooking method is normal grilling, utilising the inner part only of the top element, which directs heat downwards onto the food. Suitable for grilling small portions of bacon, toast, meat etc. This cooking method uses the top element in conjunction with the fan, to help give a fast circulation of heat.
o The appliance will switch on the grill element and lower element, as well as running the fan. This combination will allow rapid preheating of the oven cavity to 210°C. o When the oven has reached 210°C, the rapid pre-heating function will switch off. o At this point, you should place your food in the oven and select an appropriate cooking function and temperature. o IMPORTANT: Please note that it is not possible to adjust the temperature that the oven is heating to during the rapid preheating function.
Timer functions Setting the minute minder function This function allows you to set a countdown time. When this period of time has elapsed, an audible alarm will sound. The countdown time can be set, before or after a cooking function and temperature have been selected. o Once the oven is switched on, turn the joystick control knob until the timer segment (TIMER) is lit. o Press the joystick control knob once to select the TIMER segment and the timer display of “00:00” will flash.
Setting the duration function This function will allow you to set a countdown time similar to the minute minder function. However the oven will no longer continue to heat, once the countdown period has elapsed. o Select a cooking function and oven temperature (as described in previous sections of this manual). o When the oven has started to heat, turn the joystick control knob until the timer segment (TIMER) is lit.
o To switch the oven off, turn the joystick control knob until the symbol is lit. o Press the joystick control knob once. o The word “OFF” will appear on the left hand display and there will be a brief audible signal. Setting the end cook function This function is similar to the duration function, however instead of selecting a period of time that you wish the oven to switch off after. You select the time of day that you wish the oven to switch off at. o Select a cooking function and oven temperature.
Press the joystick control knob and the remaining time will appear on the timer display (6). o At the end of the countdown time, an audible signal will sound and the oven will stop heating. o To switch the oven off, turn the joystick control knob until the symbol is lit. o Press the joystick control knob once. o The word “OFF” will appear on the left hand display and there will be a brief audible signal.
o Press and hold down the joystick control knob until the left hand display shows the current volume of the audible signal. The audible signal will also sound. L1 = low L2 = medium L3 = high o Turn the joystick control knob clockwise or anticlockwise to adjust the volume of the audible signal. o When the left hand display shows the desired volume level, stop turning the joystick control knob and press it once to confirm the volume level.
Fish Bread/pizza Meat o Turn the joystick control knob until the symbol for the food group that you want to select a recipe for is lit. o Press the joystick control knob once. o Turn the joystick control knob until the recipe number that you require appears next to the food group symbol. In the diagram above, the fourth preset meat recipe (meat loaf) has been selected. o The left hand display will show the cooking function, temperature and time automatically selected for the particular recipe number.
FISH BREAD/ PIZZA MEAT 1 2 Sea Bream Salmon 3 Tuna 4 5 Trout Mullet 1 2 Savoury focaccia Bread 3 Pizza 4 5 1 Savoury tart Pizza roll Roast pork 2 Roast veal 3 4 5 Roast chicken Meat loaf Beef fillet 6 Spare ribs Centre grill Conventional oven Conventional oven Centre grill Conventional oven Conventional oven + fan Bottom element + fan Conventional oven + fan Conventional oven + fan Fan oven Conventional oven + fan Conventional oven + fan Conventional oven + fan Fan oven Conventional ove
o Turn the joystick control knob to select the recipe number where you wish to memorise the personal recipe. o If a number flashes, then this means that no existing recipe has been saved in this position. If a number is fixed, then this means that there is already a recipe saved in this position (preset or personal); however it is possible to overwrite it. o Press the joystick control knob once to save the personal recipe.
o If you are using the fan oven function, then you should follow the information given on the food packaging for this particular mode of cooking. o You should pre-heat the oven and not place food inside of it until the letter “C” and the “°” symbol remain fixed. You can choose not to pre-heat when using the fan oven mode; however you should extend the cooking time given on the food packaging by at least ten minutes.
them inadvertently when handling the food which you are grilling. o Important: Be careful when opening the door, to avoid contact with hot parts of the oven and steam. o Warning: Accessible parts may become hot during use. Young children should be kept well away from the oven when it is in use. o The enamelled baking tray handle should only be used to reposition the tray and NOT for removing it from the oven cavity. When removing the enamelled baking tray, you should ALWAYS use an oven glove.
o You can select a different cleaning time by rotating the joystick control knob to highlight the duration symbol (4) and pressing the knob once. You can then set a cleaning time between 30 minutes to 3 hours depending on the level of cleaning that you require. Press the joystick control knob to make a selection. o If you turn the joystick control knob to the end cook symbol (5) and press the knob once, you can set the end time for the cleaning cycle.
o We would recommend that an appropriate stainless steel cleaner and polish is regularly used on the stainless steel surfaces of this appliance. o If you use any form of oven cleaner on your appliance, then you must check with the manufacturer of the cleaner that it is suitable for use on your appliance. o Any damage that is caused to the appliance by a cleaning product will not be fixed by Baumatic free of charge, even if the appliance is within the guarantee period.
Removing the oven door for cleaning To facilitate the cleaning of the inside of the oven and the outer frame of the oven, the door can be removed as follows:o The hinges (A) have two movable bolts on them (B). o If you raise both of the movable bolts (B), then the hinges (A) are released from the oven housing. o You should grip the sides of the door at the centre and then incline it slightly towards the oven cavity and then by pull it gently away from the oven cavity.
Removing the inner door glass for cleaning o Do not use any abrasive cleaner that could cause damage. o Remember that if the surface of the glass panel becomes scratched, this could lead to a dangerous failure. o To facilitate cleaning, the inner door glass can be lifted out. o To facilitate cleaning, the door glass can be lifted out. o Open the door of the oven to a 45° angle. o There is a plastic sealing section at the top of the oven door, which has 4 small slots in it.
o Repeat this process for the other slots and you will be able to lift the plastic sealing section away from the top of the door. o This will allow you to access the inner door glasses. o Carefully slide out the middle door glasses to remove them from the oven door. IMPORTANT: Remember where each panel of glass is removed from so you can reassemble the door correctly. Do not mix the glasses up or rearrange the order.
o To connect the oven power cord, loosen and remove the cover on the terminal block, in order to gain access to the contacts inside. Make the connection, securing the cord in place with the cable clamp provided and then immediately close the terminal block cover again. o If you have to change the oven power cord, the earthing (yellow/green) conductor must always be 10 mm longer than the line conductors. o Care must be taken to ensure that the temperature of the mains supply cable does not exceed 50°C.
Ventilation requirements (Figure shows the ventilation and cut-out requirements for the installation of the appliance into a standard kitchen unit). (Figure shows the ventilation and cut-out requirements for the installation of the appliance into a tall housing unit). o Ensure that the oven has been securely fixed into the housing unit. The fixing of the oven into the housing is made by using four screws. These should be screwed through the oven cabinet and into the housing unit.
My appliance isn’t working correctly Error codes Error code ER:01 ER:17 ER:16 Cause PT1000 cooking chamber sensor defective PT1000 cooking chamber sensor defective Excessive temperature in the oven cavity.
* Check that the operating instructions for setting the time of day and putting the appliance into manual operation mode have been followed. o The grill function works but the main oven does not. * Check that you have selected the correct cooking function. o The grill and top oven element is not working, or cuts out for long periods of time during use. * Allow the oven to cool for approximately 2 hours. Once cool, check whether the appliance is again working properly. o My food is not cooking properly.
IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact the Service Department on telephone number 1800 444 357. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. Please note that if an engineer is asked to attend whilst the product is under guarantee and finds that the problem is not the result of an appliance fault, then you may be liable for the cost of the call out charge.
Think Appliances Pty Ltd. 416-424 Barry Rd Coolaroo VIC 3048 Sales Telephone 1300 132 824 Service Telephone 1800 444 357 Website www.thinkappliances.com Applico Ltd. P.O. 92900 Onehunga, Auckland, New Zealand 1061 Website www.applico.nz United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Website: www.baumatic.co.
