User manual

17
ing function and temperature Selecting a cook
Selecting manual operation mode
After your appliance is connected to your mains supply for the
first time, the numbers on the timer display will flash. Before
you can select a cooking function or set a temperature, you
, press the “manual operation”
its
en function and select its
ctly normal for a smell to be produced during this
any windows in the room are left
in the room whilst the
d leave each oven on maximum setting for 30 – 40
should not burn off both ovens
d with
ponge or soft cloth. No
er a sponge or soft cloth. No abrasive cleaners
s regularly used on the stainless steel surfaces of this
appliance.
must set the appliance into “manual operation” mode.
o To select manual operation mode
button (4) on the control panel.
Before first use
o To remove any residue from the oven that may have been left
from the manufacturing process, you should select either the fan
or conventional oven function and turn the thermostat dial to
maximum temperature setting. For the secondary oven you
should select the conventional ov
maximum temperature setting.
o It is perfe
process.
o You should make sure that
open during this process.
o It is advisable for you not to remain
burning off process is taking place.
o You shoul
minutes.
o IMPORTANT: You
simultaneously.
o After both cavities have cooled, they should then be cleane
warm soapy water, using either a s
abrasive cleaners should be used.
o Outer parts of the oven should be cleaned with warm soapy
water, using eith
should be used.
o We would recommend that an appropriate stainless steel cleaner
and polish i