PECM1SS Semi-automatic built in espresso maker 1
User Manual for your Baumatic PECM1SS Semi-automatic built-in espresso maker NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference; for you or any person not familiar with the operation of the appliance.
Contents Environmental note 4 IMPORTANT SAFETY INFORMATION 5–7 Specifications Product and aperture dimensions Product specifications Standard accessories Technical specifications Description of the coffee machine Control panel The filters 7 – 11 7 7-8 8 9 9 - 10 10 11 Things to do before first use Cleaning Filling the water reservoir (manual fill mode) What to do if the water level runs low during operation Filling the water reservoir (auto-fill mode) What to do if the water level runs low during oper
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment.
IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Advice Line. General Information o This appliance is designed for domestic household use only. It can ONLY be built into a standard kitchen cabinet or housing unit and should NOT be used as a freestanding appliance.
Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time. o If it is necessary for younger family members to be in the kitchen, please ensure that they are kept under close supervision at all times. General Safety o Do not leave the espresso maker unattended. o Do not allow electrical fittings or cables to come into contact with areas on the appliance that get hot.
o The manufacturer declares that the espresso maker is built using certified materials and requires the appliance to be installed in accordance with the standards currently in force. This appliance must be used by a trained person for domestic purposes only.
o Removable water tank (capacity 1.
Description of the espresso maker Standard accessories 1) 2) 3) 4) 6) 9) 10) 11) Filter holder Spout for a single coffee dose Spout for a double coffee dose Filter for 1 Italian coffee pod or 1 dose of ground coffee Filter for 2 doses of espresso coffee or 1 French coffee pod Espresso coffee batcher (ground) Coffee pressing tool Water softener filter for the reservoir 12) 13) 14) 15) Drip tray Drip tray grid Water reservoir door Water reservoir 16) 17) 18) Pull out drawer Pipe for boiling water and st
19) 20) 21) Filter holder ring nut Power ON/OFF switch Light Control panel 22) 23) 24) 25) 26) 27) 28) 29) 30) 31) 32) 33) Power ON indicator (green) Main boiler status indicator (green) Main boiler dispensing indicator (green) Steam boiler status indicator (green) Steam dispensing indicator (green) Boiling water dispensing indicator (green) Low water level indicator (red) Main boiler activation button Main boiler dispensing button Steam boiler activation button Steam boiler dispensing button Boiling wa
The filters o Filter for 1 Italian coffee pod or 1 dose of ground coffee. o Filter for 2 measures of espresso coffee of 1 French coffee pod. Things to do before first use 1) Cleaning o It is strongly recommended to clean the appliance prior to its first use. Particular attention should be paid to the water reservoir. o For further information on cleaning the appliance, please refer to the cleaning instructions on pages 23 - 25.
o Install the appliance as per the installation instructions contained within this booklet. o Open the water reservoir door (14) and remove the water reservoir (15) from the cabinet. o Remove the water softener filter (11) from its connecting pipe and immerse it in a bowl of cold water for approximately five minutes prior to reconnecting. o Fill the water reservoir with cold water until it is two thirds full.
o Restart the machine using the power ON/OFF switch (20). o You must start the drinks making process right from the beginning, as stated in the “Using your espresso maker” section (pages 15 – 17). 3) Filling the water reservoir (auto-fill mode) o Install the appliance as per the installation instructions contained in this booklet. o Open the water reservoir door (14) and remove the water reservoir (15) from the cabinet.
3a) What to do if the water level runs low during operation o If water in the water reservoir runs low during the drinks making process the low water level indicator (28) will start flashing. The espresso machine will stop any drinks making processes that are in progress. o The water reservoir will start filling with water automatically after a few seconds. o When the water reservoir has filled sufficiently, the low water level indicator (28) will switch off.
Using your espresso maker IMPORTANT: Please note that the main boiler and the steam boiler CANNOT be operated at the same time. 1) Dispensing hot water through the main boiler o Follow the instructions on filling the water reservoir as stated previously and proceed as follows:o Press the main boiler activation button (29) to allow the boiler to heat up. During this process, the main boiler status indicator (23) will flash.
o To dispense steam, press the steam boiler dispensing button (32). NOTE: Steam will dispense from the pipe for boiling water and steam (17). o To stop steam from dispensing, press the same button again. ¾ The noise generated during this operation is perfectly normal. This is caused by the activation of the high pressure pump during this operation. ¾ It is also quiet normal for a certain amount of water to drip into the drip tray after water has been dispensed.
NOTE: Boiling water will dispense from the pipe (for boiling water and steam) (17). o To stop boiling water from dispensing, press the same button again. ¾ The noise generated during this operation is perfectly normal. This is caused by the activation of the high pressure pump during this operation. ¾ It is also quiet normal for a certain amount of water to drip into the drip tray after water has been dispensed.
Making drinks Connecting the filter holder to the main boiler o Lift the filter holder (1) towards the filter holder ring nut (19); making sure that it is in the position shown in the drawing above. o Continue lifting the holder until it locates inside of the ring nut. o Turn the handle of the holder anti-clockwise, making sure that it is fully secured. o When you have finished using the holder, turn the handle clockwise and remove it from the filter holder ring nut (19).
o To make a single dose of espresso, use the spout for a single coffee dose (2) and use one espresso cup. o To make a double dose of espresso, use the spout for a double coffee dose (3) and use two espresso cups. o Insert an appropriately sized coffee pod filter (4) or (6) into the filter holder (1). o Place the coffee pod into the filter holder (1) and place it onto the filter holder ring nut (19) on to the main boiler and lock it into position. o Place a suitably sized cup under the main boiler.
o Using the supplied espresso coffee batcher (ground) (9) put the required amount of espresso coffee into the filter holder (1). o Use the coffee pressing tool (10) to pack down the espresso coffee in the filter holder. Place the filter holder into the filter holder ring nut (19) on the main boiler and lock it in position. o IMPORTANT: Do not overfill or compact the espresso coffee too tightly. Doing this will not allow the water to flow freely. o Place a suitably sized cup under the main boiler.
o The espresso cups should also be warmed before making any espresso drink. Tips on making a cappuccino An espresso topped with an equal amount of steamed milk and froth. o IMPORTANT: When making a cappuccino, the steam boiler should be heated before the main boiler in order to reduce the time taken to heat up the main boiler. o After making a cup of espresso, you should follow the dispensing steam from the steam boiler section (pages 15 – 16).
o Put the espresso shot into a large cup and then pour the heated milk from the jug into it. The froth achieved during the frothing process should be spooned over the top. o IMPORTANT: To get the best results, milk should be semi-skimmed and preferably at room temperature. o After using the above function, a certain amount of steam should be dispensed through the pipe several times and the froth making nozzle cleaned with a damp cloth. o The froth making nozzle can be dismantled and washed in a dishwasher.
Cleaning and maintenance Cleaning operations must only be carried out when the coffee maker is cold. The appliance should be disconnected from your mains supply before commencing any cleaning process. Stainless steel sections o The stainless steel sections should be cleaned using warm soapy water. o No abrasive detergents or cleaners should be used. o No abrasive sponges or steel wool should be used on any area of the appliance. o Dry the appliance afterwards thoroughly with a soft cloth.
o Clean the water reservoir regularly using warm soapy water and make sure that the water reservoir has been rinsed thoroughly before being placed back in the machine. The drip tray o Pull the storage drawer forward and remove the drip tray. o You can either wash this drip tray in warm soapy water or wash it in a dishwasher. o Make sure that the drip tray and cover are thoroughly dried before reinstalling.
o A replacement water softener can be obtained from the Baumatic Spares Department. o When a new water softener is fitted, you should follow the filling the water reservoir instructions. INSTALLATION Installation of this appliance must be carried out by a suitably qualified person, in accordance with the current version of the following. o UK Regulations and Safety Standards or their European Norm Replacements. o Building Regulations (issued by the Department of the Environment).
Installing the espresso maker into a kitchen cabinet o Ensure that the aperture that you will be fitting the coffee machine into is of the size given in the diagram above. o Ensure that the rear panel of the furniture housing unit has been removed and that the ventilation cut out shown is adhered to.
o You must ensure that there is a hole to feed the electrical cable through. If you are going to connect the appliance to your mains water supply, then you must ensure that there is a hole to feed the inlet hose through too. These steps must be done before commencing the rest of the installation process. o IMPORTANT: If the appliance has been plumbed to your mains water, make sure that the stop valve is easily accessible during an emergency. 1. Measure a height of 200 mm from the base of the housing unit.
Do not proceed with the rest of the installation steps listed below, until you have completed the “Connecting the espresso maker to the mains water supply” section on the next page. You should also feed the electrical cable through the hole that you have made for it in the housing unit. You should NOT connect the cable to the spur outlet at this stage. 4. Place the coffee machine inside of the housing unit. 5. Sit the coffee machine in the housing unit.
Connecting the espresso maker to the mains water supply Your coffee machine can be connected permanently to your mains water supply. IMPORTANT: The inlet hose used for connecting the appliance to the mains water supply should be suitable for supplying water for human consumption (FDA approved/MIN 5mm- MAX. 12/13mm) and obtained from a DIY or plumbing store. 1. Connect the inlet hose (G3/4") coupling connecter to the inlet valve at the rear of the espresso machine as shown in the opposite picture.
7. Insert the other end of the inlet hose into the coupling. 8. IMPORTANT: Test the joint connections for any leak by turning on the water supply. TROUBLESHOOTING My espresso machine will not work at all. o Check your mains supply and the electrical connection. My espresso machine will not dispense water. o Check that the water reservoir is filled with water. o If your appliance is connected to your mains water supply then check: That the water inlet hose is not kinked or blocked.
Flashing red light o Low water level in the water reservoir. Follow the filling instructions. Steady red light o Low water level in the water reservoir. Follow the filling instructions. All ‘LED’ light indicators flashing constantly o Switch off the appliance and restart after approximately 60 minutes. If the error still persists, contact the Baumatic Customer Care Department to arrange an engineer’s visit.
espresso. This is only created when the pressure is sufficiently high. The crema contains the foamed oils which are rich in flavour and aroma. Espresso- see “caffe”. Macchiato- espresso carrying a dollop of hot, foaming milk to give a dappled look. IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact the Customer Care Department on telephone number (0118) 933 6911. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.
Baumatic consumables o BC001 Degreaser for Dishwashers (200 g) o BC002 Descaler for Washing Machines and Dishwashers (200 g) o BC003 Ceramic Hob Cleaner (250 ml) o BC004 Oven Cleaner (250 ml) o BC005 Stainless Steel Cleaner and Protector (250 ml) o BC007 E-Cloth – General Purpose Cloth o BC008 Microwave Cover To order a Baumatic consumable product please call 0123 5437 244 and quote the product code. You can also order online from eshop.baumatic.co.
Czech Republic Baumatic CR spol s.r.o. Lìpovà 665 460 01 Liberec 4 Czech Republic United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom +420 483 577 200 www.baumatic.cz Slovakia Baumatic Slovakia, s.r.o.
