Operation Manual

14
3a) What to do if the water level runs low during operation
o If water in the water reservoir runs low during the
drinks making process the low water level indicator
(28) will start flashing. The espresso machine will
stop any drinks making processes that are in
progress.
o The water reservoir will start filling with water automatically
after a few seconds.
o When the water reservoir has filled sufficiently, the low water
level indicator (28) will switch off.
o The low water level indicator (28) will remain steady if the
appliance is insufficiently filled. If this occurs, you should switch
off the appliance using the power ON/OFF switch (20) and
restart after a few seconds. The appliance will automatically
commence a further fill of the water reservoir.
o DO NOT touch any other button on the espresso machine during
this process.
o You must start the drink making process right from the
beginning, as stated in the “using your espresso maker” section
(pages 15 – 17).
4) Getting started (Loading the system with water)
IMPORTANT: YOU MUST FOLLOW THE STEPS BELOW
BEFORE HEATING THE WATER BOILER FOR THE
FIRST TIME.
o Place a jug below the pipe (for boiling water and steam) (17).
o Push the boiling water dispensing button (33).
o Allow the appliance to have a constant flow of water running
through the system for a few seconds.
o Press the boiling water dispensing button (33) again to stop the
flow of water from the pipe.