Operation Manual

25
o A replacement water softener can be obtained from the
Baumatic Spares Department.
o When a new water softener is fitted, you should follow the filling
the water reservoir instructions.
INSTALLATION
Installation of this appliance must be carried
out by a suitably qualified person, in
accordance with the current version of the
following.
o UK Regulations and Safety Standards or their European
Norm Replacements.
o Building Regulations (issued by the Department of the
Environment).
o Building Standards (issued by the Scottish Development
Department).
o IEE Wiring Regulations.
o Electricity At Work Regulations.
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance should be wired into a 13 A double pole
switched fused spur outlet, having 3 mm contact separation and
placed in an easily accessible position adjacent to the appliance.
The spur outlet must still be accessible even when your coffee
machine is located in its housing.
o If you have to change the coffee machine power cord, the
earthing (yellow/green) conductor must always be 10 mm longer
than the line conductors.
o Care must be taken to ensure that the temperature of the mains
supply cable does not exceed 50°C.
o If the mains supply cable is damaged, then it must be replaced
with a suitable cable.