User manual

Installing your cooker hood

o We recommend that at least two people install this hood.

IMPORTANT: THE MAINS SUPPLY THAT YOUR COOKER HOOD IS

CONNECTED TO, MUST NOT BE SWITCHED ON UNTIL AFTER THE

REST OF THE INSTALLATION PROCESS HAS BEEN COMPLETED.

1) Reach inside of the appliance, remove the tape that secures the

power cable to the framework and release it.

2) Turn the hood upside down, so that the bulbs are facing upwards.

o Open the cover screen.

o Remove the grease filter by pulling down on the latch and pulling it

away from the hood.

3) From inside of the motor housing,

undo the four screws that hold the

framework in position.

4) As shown in the picture, remove

the four screws which hold the inner

chimney section to the upper plate.

5) Dislocate the cooker hood from the framework by lifting the hood

clear of the framework.