User manual

15) If required, raise the inner chimney section to the ceiling.
o There are two decorative side pieces (H) that should be used to
cover the grooves in the inner chimney section.
o Use an appropriate tool to cut the decorative side pieces to your
required length. The length of the side pieces will be governed
by how high you need to raise the inner chimney section.
o Slide the decorative side pieces into the grooves on each side of
the inner chimney section.
o Bend down the hooks at the top of the decorative side pieces so
that they sit over the top of each groove.
16) If you have raised the inner chimney section, you should secure it
to the upper plate using the screws that you removed in step 4.
o IMPORTANT: You should make sure that the screws are fully
tightened.
22