User manual

Installing the appliance at minimum height
1) If you are installing the product at minimum height, then you
need to remove the 10 screws from the framework, including the 2
pre-tightened screws. Separate the inner and outer sections of the
framework.
2) Remove the 4 rivets that hold the upper
plates onto the inner framework.
3) Fix the upper plates to the outer
section of the framework to make it
stable, using 4 of the screws that
you have removed in step 1.
IMPORTANT: You should not use
either of the pre-tightened screws
to fix the upper plates to the outer
section of the framework.
4) Continue the installation process from step 3 on page 19.
23