User manual

o There are four different food groups that have separate heating
programmes, as shown in the table below:-
o To change the auto programme, press the cook time
button/display (G), the clock and cook time indicators will flash.
Use the plus and minus buttons to cycle through the cooking
programmes.
o To adjust the weight, press the weight button/display (E), the
grams indicator will flash. Use the plus and minus buttons to
adjust the cooking weight.
o Press the start button (I) and the oven will start to heat; the
cooking time is worked out automatically by the appliance.
o At certain points in the heating process, the microwave will give
an audible signal and the LED display will have the word “turn”
flashing on it. When this occurs, you should open the door of the
microwave, stir the food thoroughly and turn the food over (if
appropriate).
o At the end of the heating time, your microwave will give an
audible signal and the LED display will show the word “END”.
Preparation instructions for auto cooking function 2
o Fish pieces- Add 1 – 3 soup spoons of water or lemon juice.
o Rice
- Add 2 – 3 times the amount of water to the amount of
rice.
o Unpeeled potatoes- Use potatoes that are the same size. Wash
them and prick the skin of the potatoes several times. Do not
add water.
o Peeled potatoes and fresh vegetables
- Cut into pieces of the
same size. Add a soup spoon of water for every 100 g of
vegetables that you are cooking.
27