User manual

12
etting and using the oven programmer/timer S
Selecting manual operation mode
After your appliance is connected to your mains supply for the
first time, the numbers on the timer display will flash. Before
you can select a cooking function or set a temperatur e, you
u t
o , press the manual operation
en for manual operation, you should also
t h
o me
e will fix in the display and you will be able to
e r
o
turn the thermostat dial to its
o ctly normal for a smell to be produced during this
o any windows in the room are left
o in the room whilst the
o d leave the oven on maximum setting for 30 – 40
minutes.
m s set the appliance into manual operation mode.
To select manual operation mode
button (7) on the control panel.
Setting the time of day
After setting your ov
se t e time of day.
Use the minus button (8) and plus button (9) to adjust the ti
that appears in the display. After getting the display to the
correct time, release the minus and plus buttons. After a few
seconds the tim
use your oven.
B fo e first use
To remove any residue from the oven that may have been left
from the manufacturing process, you should select either the fan
or conventional oven function and
maximum temperature setting.
It is perfe
process.
You should make sure that
open during this process.
It is advisable for you not to remain
burning off process is taking place.
You shoul