User manual

25
) Loosen the screws that fix the control panel. These can be found in
the
o
) IMPORTANT: Support the oven door from the underneath
wh
Rotate the control panel as shown whilst supporting the
o per pivot pin. IMPORTANT: The upper pivot pin
must be retained, as it will be required when the door is being
o ven cavity and gently lean it on
some padded material, to ensure that no damage is caused to
the oven door or door glass.
2
following positions:-
o On the stainless steel sides of the oven.
On the base of the control panel (where the ventilation slots are
cut out).
3
ilst attempting the next stage.
o
underneath of the oven door.
Remove the up
reassembled.
Pull the door away from the o