User manual

12
o The joystick control knob should be used to access the various
setting options that appear in the segments around it.
o You should press the oven selector control knob once to activate
it.
o As you turn the joystick control knob, the segments around the
outside of it will light.
o To confirm the menu that you want to access, you should press
the joystick control knob once when the relevant segment is lit.
Before first use
Setting the time of day
o After your appliance is connected to your mains supply for the
first time, all of the segments around the joystick control knob
will light up for approximately 3 seconds.
o The numbers on the timer display (6) will flash 00:00. Before
you can select a cooking function or set a temperature, you must
set the appliance into manual operation mode and set the time
of day.
o Turn the joystick control knob clockwise and the numbers on the
timer display (6) will increase. Turn the joystick control knob
anti-clockwise and the numbers on the timer display (6) will
decrease.
o When the correct minute time shows on the timer display (6),
press the joystick control knob once.
o Turn the joystick control knob until the correct hour time shows
on the timer display (6). When it does, press the joystick control
knob again.
o If you have successfully set the time of day, then the correct
time of day will appear on the timer display (6). If you have not
successfully set the time of day, then “00:00” will reappear and
you will need to follow the above process again.
Oven burn-off
o To remove any residue from the oven that may have been left
from the manufacturing process, you should select either the fan
or conventional oven function and set the thermostat to its
maximum temperature setting.