User manual

as adjustment (Conversion to LPG and flow adjustment).
All work must be carried out by a CORGI registered
IMPO from the electricity
upply before changing the injectors and/or adjusting the
mi
o Remove the pan-stands, burners and
flame spreaders (A).
o
w tor for the new gas
supply (see table below).
o Reassemble all the burners carefully; in particular you should
make sure that the flame spreader is correctly placed on the
burner.
G
engineer.
RTANT: Always isolate the cooker
s
nimum flow of the burners.
Unscrew the injector (B) and replace it
ith the stipulated injec
29