User manual

o Use a screwdriver to retighten the 6 fixing screws that hold the

light board in place.

o Refit the grease filter once it has dried and then retighten the

fixing screw that holds it in place.

o If the lights still do not work, make sure that the bulbs are fitted

properly into their housings before you call for technical

assistance.

Fitting the carbon filters

If the appliance is being used to be used in recirculation mode then it

is necessary to fit carbon filters. This will help to absorb unpleasant

odours caused by cooking.

IMPORTANT: BEFORE ATTEMPTING TO FIT OR

REMOVE THE CARBON FILTERS, YOU MUST

ENSURE THAT YOU HAVE DISCONNECTED THE

COOKER HOOD FROM YOUR MAINS SUPPLY.

1) Remove the grease filter.

2) Hook the carbon filter over

the pins that are located at the

end of the motor.