Operation Manual

Fitting the carbon filter

If the appliance is being used to be used in recirculation mode then it

is necessary to fit carbon filters. This will help to absorb unpleasant

odours caused by cooking.

IMPORTANT: BEFORE ATTEMPTING TO FIT OR

REMOVE THE CARBON FILTERS, YOU MUST

ENSURE THAT YOU HAVE DISCONNECTED THE

COOKER HOOD FROM YOUR MAINS SUPPLY.

1) Remove the grease filters.

2) Place a carbon filter at both sides of the motor. You should make

sure that the cut out in the rim of the carbon filter, lines up with the

lug on the motor.

3) Turn the each of the carbon filters clockwise

until they lock securely into place.

o Refit the grease filters.

o The carbon filters should be replaced every

three months or if they show signs of

damage.