User manual

Before inst t hat the
INSTALLATION INSTRUCTIONS - Electrical
allation and usage, read all the ins ructions and make sure t
voltage (V) ed ication plate (found and the frequency (Hz) indicat on the identif
inside your he Cooker Hood) and all the data inside the appliance are exactly t
same as th nd frequency in your hoe voltage a me.
NOTE: The manufacturer declines all responsibility in the event of failure to observe all the
accident-p ention regulations in force which are nec regular
operation lectric system.
___________ _
ELECTRICAL CONNECTION
Y
Y
o
o
u
u
r
r
c
c
o
o
o
o
k
k
e
e
r
r
h
h
o
o
rev essary for normal use and
__________________
of the e
________________
o
o
d
d
i
i
s
s
i
i
n
n
t
t
e
e
n
n
d
d
e
e
d
d
f
f
o
o
r
r
fitted and permanent installation
fitted and permanent installation
.
.
cable clamp. distance of at least 3mm.
o The power cable must be
connected to the terminals
marked L (live) and N (neutral)
in the hood and fixed with a
o The cooker hood’s power cable
must be fitted upstream from the
electrical connection using an
omni-polar switch with a contact
NOTE: (UK only) WARNING – THIS APPLIANCE MUST
NOT BE EARTHED. It should only be
connected by a competent person using fixed wiring via a DOUBLE POLE SWITCHED FUSED
SPUR OUTLET.
We reco cted by a qualified electrician who is a member
e wires in
the mains lead are coloured in accordance with the following U.K. code:
n = Live, G e
If you can only find two wires in the cable (blu st be
mmend that the appliance is conne
of the N.I.C.E.I.C. and who will comply with the I.E.E. and local regulations. Th
Blue= Neutral, Brow re n/Yellow = Ground
e and brown), neither mu
connected to the Earth terminal!
• As the colours of the wires in the appliance’s mains lead may not
correspond with the coloured markings identifying the terminals in
your spur
box, please proceed as follows:
__________________________________________________________
to the t
marked ‘
(Neutral), or
1) The BLUE WIRE
must be connected
erminal
N’
coloured Black.
2)
The BROWN
WIRE must be
ted to the
‘L’ (‘Live’), or
connec
terminal marked
coloured RED
(Fig. 7 – at left)
11