User manual

st not
be fitted above stoves with a
: We rec t least
two people install this hood.
: Do not tile, grout or silicone
this h
OOKER HOOD COMES WITH THE FOLLOW
CCESSORIES:
- 4 SCREWS -RAWLPLUGS
O NOT position i
(70 ve n
2)
3) LO
up wi h
ig below
4) I sc
ight using the s w).
5) nsured the unit will be able to sit properly (& is connected
o the ucting, if using cure.
:
The cooker hood mu
INSTALLATION INSTRUCTIONS
radiant top plate.
NOTE – YOUR C
ommend that a
ood to the wall.
ING FIXING
A
- 1 SPACER
1) Your Baumatic Cooker Hood should only be fitted into the underside of a
dedicated cabinet / kitchen unit. D t any less than 700 mm
rha g the hob.
cm) above the hob or let other cabinets o
emove the metal anti-grease grille.
rill where indicated. SEE DIAGRAMS BE
diameter of 6mm, make holes to line
ooker hood’s fixing surfaces (see F
ns rt rawlplugs into the holes and work
ooker hood so that it is stra
R
D W. Using a drill with a
t the screw holes on the
).
c .
e rews in partway. Adjust your
pacer (‘F’ in figure belo
c
Once you have e
t d as an extraction fan), tighten the screws to se
A).
B).
60
194
516
–
installin
g
y
our Cooker Hood
PLEA
IT AS AN EXTRACTION FAN. IF THIS
IS THE CASE, YOU’LL NEED TO ATTACH
gure at bottom of
CTING. YOU’LL ALSO
AVE PREPARED YOUR WALL
STEM PROPERLY
SE NOTE THAT YOU WILL HAVE
ECIDE BEFORE INSTALLING YOUR
TO D
COOKER HOOD THAT YOU CAN ADAPT
A SPIGOT (‘A’ in fi
page) AND DU
NEED TO H
EXHAUST SY
12