User manual

Using your dishwasher
Before first use
o Install the appliance as per the installation instructions contained
within this booklet.
o Fill the water softener with 1 litre of tap water and then fill with
specialist dishwasher salt. After this you should set the water
softener level.
o Fill the rinse aid dispenser and then set the rinse aid doseage.
Filling with dishwasher salt
IMPORTANT: You should only use salt that is specially
designed for use in a dishwasher. If any other type of salt is
used in the appliance (in particular table salt), it will damage
the water softener.
o Ideally you should fill the water softener with salt, just before
you are about to run a wash program. This will help to clear any
salt that may have overflowed from the water softener during
the salt filling process.
o Open the door of the dishwasher and then remove the lower
basket. The basket should be empty when you remove it.
o Turn the salt container cap anticlockwise and remove it.
o Pour 1 litre of water into the water softener container.
IMPORTANT: It is only necessary to do this when you fill
the container with salt for the first time.
o Pour salt into the salt container,
using the funnel that is supplied
with the appliance. You should add
approximately 1.2 kg of salt into
the container.
o It is perfectly normal for a small
amount of water to come out of
the salt container, whilst you are
filling it with salt. This does not
mean that the container is filled
with the necessary level of salt.
o Refit and fully tighten the salt container cap.
11