User guide

Rapid date and month correction

1) Set the crown in Position 2.

2) Turn it counter-clockwise, scrolling through

all 31 days (E) until the desired month (M) is

displayed. Continue to turn the crown counter-

clockwise until the desired date (E) appears.

3) Reset the crown (Position 1).

Note:

The annual date function on your watch is able to

keep track of 30 day months; the month of February

is treated as a 30-day month. At the end of February,

you must adjust the date setting manually using the

rapid date change function.

WARNING:

To prevent damage to the movement, it is ex-

tremely important that you do not adjust your

rapid date setting between 8 pm and 2 am; this

is when the movement pinions are working to

automatically change the date.

C. CHRONOGRAPHS

SIMPLE CHRONOGRAPH

3a 3d3b 3e3c 3f 3g

P1:

Start/stop push-button. Press once to start the

chronograph (F=seconds, G=minutes, H=hour).

Press a second time to stop and a third time to

start the chronograph again.

P2:

Reset push-button. Once the chronograph has been

stopped by pressing the P1 push-button, press the

P2 to reset all counters to zero.

To measure several successive times, without

counting intervals, press the P1 push-button

several times consecutively, as follows:

1) Start.

2) Stop and read.

3) Start.

4) Stop and read.

This operation may be repeated as often as desired

to measure successive times.

5) Press the

P2 push-button to reset the chrono-

graph to zero.

English